Black Friday deals have come for Sony gear, and that means you can get some of the best noise-cancelling headphones on the market for less. The still-excellent WH-1000XM5 wireless headphones are down to $250, which is the lowest price we’ve seen them. Yes, the latest model, the XM6, have technically replaced these in Sony’s lineup. But if the latest flagships are out of your price range, these former Engadget favorites are well worth considering at this heavily reduced price.
Sony
We awarded the WH-1000XM5 a score of 95 in our 2022 review, praising the supremely comfortable redesign, sound quality and powerful ANC. Battery life is also very respectable at 30 hours. We found the punchy bass an improvement over their predecessors, and the overall sound deeper and more immersive than the M4 headphones. As for noise-canceling, Sony’s decision to double the number of microphones and processors used for ANC means an improvement in blocking higher frequency sounds, such as human voices. They aren’t entirely baby scream-proof, but then few headphones are.
Naturally, the WH-1000XM6 that this year replaced the M5 as Sony’s flagship model offers even better sound quality and noise cancellation, while remaining extremely comfortable throughout long listening sessions. But they’re also a lot more expensive at $450 — they’re on sale now for $398 for Black Friday, so you have the option to upgrade to the latest flagship if you’re willing to spend a bit more. However, we still think the XM5 deal is the best value for most people here.
High-resolution audio on the go isn’t very convenient. It typically involves wired headphones and a DAC (digital-to-analog converter) of some kind, plus your phone or another device to access files or a streaming service. All of this is necessary since Bluetooth compresses an audio signal by design, to allow for low-latency transmission and minimize battery draw. Simply put, wireless headphones haven’t been able to meet the demands of lossless audio, but Sennheiser has come the closest to fulfilling the dream with its HDB 630 ($500).
Thanks to redesigned drivers, a new acoustic platform and a dongle, the company offers up to 24-bit/96kHz audio on the HDB 630 — depending on your configuration. You also get above average active noise cancellation (ANC), a highly customizable EQ, shockingly long battery life and advanced features to fine-tune the headphones to your liking. For some, the best possible sound is still only found on pricey setups and open-back headphones. For everyone else, Sennheiser has provided a taste of the audiophile life in a much more portable package.
Sennheiser/Engadget
Sennheiser moves closer to open-back performance in a set of closed wireless headphones with the HDB 630, but they look more midrange than high-end.
Sennheiser says the HDB 630 “inherited” the same chassis from its Momentum 4 headphones. That’s unfortunate because my biggest complaint with that older model’s redesign is how cheap it looked compared to previous entries in the Momentum line. The HDB 630 suffers the same fate, although the splash of silver on the headband and yokes helps things a bit. Simply put, these don’t look like a set of $500 headphones, and since they’re $150 more than their predecessor was at launch, they really should have a more premium appearance.
The outside of the right ear cup is still a touch panel where you can swipe, tap and even pinch to control the HDB 630. I don’t recall another set of headphones with a pinch gesture, and I’m still not convinced it’s warranted. The action is used to enable an Adaptive ANC adjustment that allows you to dial in the amount of noise blocking you need. After the pinch, sliding a single finger forwards and backwards fine tunes the mix of ANC and transparency mode. It’s a nice option to have on the headphones themselves, I just think a triple tap to activate it would be easier to master — and remember.
The only other button on the HDB 630 is for power and Bluetooth pairing. Unless you’re frequently connecting these headphones to a new device, you might not be reaching for this control very often. That’s because the HDB 630 goes into standby mode when you take them off before powering down completely after 15 minutes of inactivity. You can extend that window to 30 or 60 minutes if you prefer. And if the headphones still have battery left, you can return to active mode by simply putting them back on your head.
Sennheiser is betting you’ll use the HDB 630 for long listening sessions, so it outfitted these headphones with soft ear pads and a well-cushioned headband. The clamping force is adequate for a proper ANC seal, but never becomes a burden. And despite being around 20 grams heavier than the Momentum 4, this model still feels balanced and doesn’t weigh you down.
Sound quality
The HDB 630 features new drivers and a specially designed acoustic system.
(Billy Steele for Engadget)
While the overall design may be familiar, the sound platform for the HDB 630 is completely new. 42mm drivers offer what Sennheiser says is “neutral sound with lifelike mids, stunning detail and a wide soundstage.” In order to deliver sound quality that’s as close to open-back headphones as possible, the company overhauled the entire acoustic system, from the drivers to the baffle’s transparent mesh, in the name of balance and clarity. And since audiophile headphones typically require a dedicated external amplifier to achieve their full potential, Sennheiser included a BTD 700 USB-C dongle for high-resolution wireless audio transmission.
When I first put the HDB 630 on, I thought the audio quality was good but not great. Listening over the standard definition SBC codec produced decent results, but it wasn’t anything to write home about. Once I connected to the BTD 700 dongle and unlocked 16-bit/48kHz tunes from Apple Music, though, these headphones really started to impress.
As good as they are, the HDB 630 may not be for everyone. That “neutral” stock tuning places high emphasis on the midrange, so you’ll likely need to make some adjustments to get the bass performance you crave from rock, electronic, hip-hop and other genres driven by low-end tone. While I concede the neutral base is a great starting point, and the HDB 630 does indeed showcase “stunning detail,” I’d argue Sennheiser’s promise of “a wide soundstage” doesn’t always hold true.
These headphones are at their best with more immersive content, like the TRON: Ares soundtrack from Nine Inch Nails. After a slight adjustment, the electronic score had the booming bass it needed, offering driving beats that nearly rattled my brain. All that was layered with rich synths and Trent Reznor’s iconic vocals. The texture and distortion in the instruments came through in greater detail too, something that’s not as apparent on other headphones and earbuds.
Switch over to Thrice’s Horizons/West and the HDB 630 is a different story. Transitioning from synth-heavy electronic music to a genre like rock causes these headphones to lose some of the immersive character they are capable of delivering. You still get absurd clarity and detail, particularly in Teppei Teranishi’s guitar riffs, but the music sounds slightly flatter and a little less energetic. It’s not bad by any means, but some genres won’t envelope you as much as others do.
You can also use the HDB 630 wired over USB-C for lossless-quality audio. Since a number of competitors also do this, I dedicated the bulk of my testing to see if Sennheiser’s wireless dongle is meaningfully different. Of course, I did my due diligence and tested the wired configuration a few times, and it should come as no surprise that the HDB 630 sounds just as good in that setup.
Software, features and accessories
There’s only one button on the HDB 630.
(Billy Steele for Engadget)
As I mentioned, the HDB 630 comes with Sennheiser’s BTD 700 Bluetooth USB dongle. This enables higher quality streaming than you’ll natively get from most devices. With the BTD 700, you can expect aptX Adaptive and aptX Lossless listening up at rates to 24-bit/96kHz. The dongle also has a 30ms low-latency gaming mode, (supposedly) enhanced call performance and Auracast support for streaming to multiple headphones or speakers. The BTD 700 has a USB-C connector, but it comes with a USB-A adapter if you need it. This typically costs $60 if you buy it on its own, and since you need it to unlock the HDB 630’s full potential, it’s great to see it included in the box.
The HDB 630’s settings and features are accessible in the Sennheiser Smart Control Plus app. And for this model, the company is offering a lot more customization than it does on the Accentum or Momentum headphones. First, the EQ editing options are more robust thanks to a parametric equalizer, which allows you to get a lot more detailed with your custom presets. For example, I was able to add the low-end tone I feel is missing from the stock tuning for those metal, rock and hip-hop tracks I mentioned before. And unlike a lot of headphone apps, adjusting the EQ actually improves the sound instead of just muddying things further.
Another sound-related addition for the HDB 630 is Crossfeed. This allows you to blend the left and right channels so that it seems like you’re listening to speakers instead of headphones. Unfortunately, you only get two options here — Low and High — but the effect certainly enhances the sonic profile of the HDB 630 at both settings.
Despite the BTD 700 dongle’s Mac and Windows compatibility, there’s no desktop version of the Smart Control Plus app. This means you’ll have to change all of your settings with the HDB 630 through your phone before you pair it with both the dongle and your computer. It would be nice if you could make EQ adjustments, create new presets and even change Crossfeed levels without having to reconnect to another device. This also means you can’t be connected to the BTD 700 and both your phone and your computer, since the dongle takes one of the two available multipoint Bluetooth slots.
Active noise cancellation and call quality
The HDB 630 has a very basic design with lots of plastic.
(Billy Steele for Engadget)
When it comes to ANC performance, I’m not entirely sure that the HDB 630 is better than the Momentum 4. But that’s okay. That previous model brought a significant improvement compared to Sennheiser’s older wireless headphones and the ANC is still quite good here. In fact, it was robust enough to block my family’s voices during their calls while I worked from home, and since most headphones struggle with this, that’s no mean feat.
Sennheiser says the BTD 700 dongle will give you improved voice performance over the headphones alone. Specifically, the accessory should provide extended range, clearer voice pickup and, according to the company, “uninterrupted” calls. In my recorded samples, I think the headphones themselves sounded slightly better than when I captured my voice while connected to the BTD 700. However, I noticed a distinct lack of background noise in both clips, which is helpful in busier environments. I’ll also note the overall voice quality isn’t pristine, but it’s clear enough to use for work calls — even if you’re the main presenter.
Battery life
Sennheiser promises that you’ll get up to 60 hours of battery life on a charge with the HDB 630. That’s the same staggering figure the company claims on the Momentum 4. And yes, that’s with ANC enabled, but you’ll only achieve that if you’re listening to standard resolution tunes. Based on my testing with a mix of noise cancellation and transparency mode while I was listening to music and taking work calls, I have no reason to believe the company’s numbers don’t hold true. If you choose to listen entirely via the BTD 700’s higher quality output, you can expect up to 45 hours of use on a charge. That’s still quite a long time considering a lot of the competition runs out at around 30 hours — and that’s without high-res music.
Due to all of the signal processing that helps with the acoustic performance on the HDB 630, they can only be used when they’re turned on. Unlike some wireless models, you can’t use these as wired headphones when the battery is spent. However, if you find yourself with a completely depleted battery, a 10-minute charge will give you up to seven hours of use. The company doesn’t specify streaming resolution for that number, but I assume it’s at standard definition. Still, you’ll get a few hours of higher-res music in that time, which should be enough to get you through a work session, evening commute or that new album you’re dying to play for the first time.
The competition
Incredible sound awaits, if you’re okay to carry a dongle around with your headphones.
(Billy Steele for Engadget)
In the realm of flagship headphones, any company’s top-of-the-line model will set you back $500 these days. I look back fondly on the time when $300-$350 got you the best Sony had to offer. While the HDB 630 is expensive, it’s also in the same ballpark of what you’ll pay for the Bose QuietComfort Ultra Headphones ($450), the Sony WH-1000XM6 ($458 currently) and the AirPods Max ($549). Each of those have their advantages over the rest of the competition, with the 1000XM6 offering the most complete package overall. However, when it comes to pure sound quality, neither of those three are at the top of the heap.
Up until now, that title belonged to the Noble Audio FoKus Apollo. At $650, those headphones are even more expensive than the HDB 630, but their stock tuning will appeal to more listeners and the soundstage is wider and more immersive. There’s also Bowers & Wilkins’ Px7 S3 for a slightly cheaper $479. It delivers the company’s warm, inviting sound and attention to finer details. After spending time with the HDB 630 though, these alternatives are just that — alternatives — as the new Sennheiser headphones are now my pick for best overall sound quality.
Wrap-up
I get it: in the current financial climate, $500 is a lot to pay for headphones (or anything else, for that matter). You can find a number of perfectly capable sets of ANC headphones for much less given how frequently things go on sale these days. However, what you won’t find is an option that gives you anything close to the performance of audiophile-grade, open-back headphones. That’s really what Sennheiser is doing here, and the HDB 630 slots nicely into the company’s HD 600 series of high-end cans.
As good as the HDB 630 is sound-wise, I can also appreciate that these aren’t the best headphones for everyone. The company’s Momentum 4 is still a very capable set of headphones and it’s now available for about $250. If you crave the best sound quality that still offers the convenience of wireless headphones — and you’re okay with a few extra steps — the HDB 630 is a worthy investment. Just don’t leave home without that dongle.
Wireless headphones have come a long way from the bulky designs of the past. Today’s models are lighter, smarter and packed with features that make them useful for everything from travel to long workdays at your desk. Many offer strong noise cancellation, quick pairing and reliable battery life — all of which makes them an easy upgrade if you want more freedom from your devices.
Of course, not every listener has the same needs. Some people want portability, which is why our guide to the best earbuds is worth a look, while others want something more specialized like the best gaming headsets or the best budget earbuds. But if you’re after over-ear headphones that focus on comfort and immersive sound, this roundup of the best wireless headphones highlights the top choices we’ve tested.
Table of contents
Best wireless headphones for 2025
Billy Steele for Engadget
Noise cancellation: Yes | Multipoint: Yes | Battery life: 30 hours | Weight: 0.55 pounds | Water resistance: None | Assistant support: Bixby, Siri, Google Assistant | Color options: Black, Platinum Silver, and Midnight Blue
Sony’s 1000X line has been our top pick for best wireless headphone for a long time now. Until another company can pack in as many premium features as Sony, and do so with a mix of excellent sound quality and effective ANC, the crown is safe. With the WH-1000XM6, Sony subtly redesigned its flagship headphones, making them way more comfortable to wear for long periods of time. This is an important factor to consider when purchasing over-ear headphones. We also noticed in our tests that the company made noticeable improvements to the active noise cancellation, thanks to a new QN3 chip. There are now 12 total ANC mics as well – the previous model only had eight. This all combines to better block background noise at medium and high frequencies, including human voices.
The M6 also has improved sound quality, thanks to new drivers, some help from mastering engineers and spatial audio upmixing. Its battery life remains the same 30 hours as its predecessor, which is more than enough to get you through several days of work or long international flights. Speak-to-Chat still reduces volume and activates ambient sound when you talk and the M6 can automatically change noise settings based on your location or activity. The only real downside is that they’re $50 more than the WH-1000XM5 at full price ($450).
Noble Audio utilizes a unique driver configuration to provide more detailed sound than the competition. Instead of a single driver, the company uses two: one dynamic and one planar magnetic. The result is the FoKus Apollo getting the best of both, with thick bass, clear highs and extreme clarity.
You won’t find a lot of features here. There is decent ANC performance, but it’s nowhere near the best. You’ll also get excellent battery life, which is the second best reason to buy these headphones. Still, you’re paying primarily for the incredible sound quality, which may not be enough for the high price.
Bowers & Wilkins continues its run of stellar audio quality on the Px7 S3. The company made tweaks to its sound platform with new 40mm bio cellulose drivers, discrete headphone amps and a TrueSound mode. There are also upgrades to ANC and slight design changes. Plus, the company is still understating its battery life figures, so you’ll get more than expected in terms of longevity here.
Noise cancellation: No | Multipoint: Yes | Battery life: 60 hours | Weight: 1.42 pounds | Water resistance: None | Assistant support: Not specified | Color options: Black, White
Audio-Technica has introduced affordable wireless headphones in the past, and while they didn’t offer active noise cancellation, they’re still worth considering. The company’s latest is the M20xBT, a Bluetooth version of the A-T’s popular M20x wired cans. For just $79, you can expect a comfortable fit and up to 60 hours of battery life. Bluetooth multipoint connectivity allows you to connect to multiple devices at once and physical buttons provide reliable on-board control. The design isn’t as refined as the company’s pricer models like the M50xBT2, but you get the bulk of what makes Audio-Technica’s cheaper options so good.
Bose’s unique take on spatial audio may be the headline feature on its QuietComfort Ultra Headphones, but the company didn’t overlook ANC on this model (Make no mistake — Sony takes the crown here for best ANC, but this Bose model is a close second.) Described as “the quietest quiet” available on any of its headphones yet, the ANC here is noticeably better than the Bose 700 and iconic QuietComfort Headphones. This is due in part to microphone enhancements that also improve call quality. The changes are especially apparent when dealing with the hard-to-combat frequency range of people talking. The company also offers presets that mix ANC, transparency mode and its spatial Immersive Audio, allowing you to quickly switch the sound to match your surroundings. And if that wasn’t enough, the touch controls make these over-ear headphones a breeze to use — so you get good noise cancelation, good sound and extra convenience bundled in this package.
While the spatial sound feature is a bit of a mixed bag, the stock tuning on the QuietComfort Ultra Headphones is still good – even before you switch on Immersive Audio. Bose has generally lagged the competition in terms of sonic prowess, but these over-ear headphones show that gap is narrowing. There’s a dash more bass to enhance a default sound profile that’s warmer, clearer and more inviting than previous Bose models, resulting in good sound overall. When Immersive Audio hits, it’s amazing and the audio quality is truly remarkable. But, the company is relying on signal processing rather than specially crafted content so the results vary.
Back at CES 2022, Panasonic announced the EAH-A800: a new set of active noise canceling headphones under the iconic Technics brand. While most of the features are what you see on any number of wireless headphones, one figure stood out. The company says you can expect up to 50 hours of battery life on the A800, and that’s with active noise cancellation enabled. While we haven’t put them through the full review analysis, I have already tested them on a long flight. The ANC is impressive and they’re comfortable enough to avoid becoming a burden after several hours or many long listening sessions. Sound quality is also quite good (there’s LDAC support, too) and there are enough features here to justify the premium price tag.
Noise cancellation: Yes | Multipoint: Yes | Battery life: 28 hours | Weight: 0.75 pounds | Water resistance: None | Assistant support: Compatible with native voice assistants | Color options: Silver Metal / Brown Leather, Black Metal / Black Leather, Silver Metal / Navy Leather, Silver Metal / Black Leather, Gunmetal / Black Leather, Gunmetal / Navy Leather, Silver Metal / Grey Leather
While Master & Dynamic is known for its design prowess, the company’s over-ear headphones were due for a refresh. With the MW75 that debuted in June, the company opted for a look that takes cues from its MG20 gaming headphones and mixes them with a combo of aluminum, leather and tempered glass. The company’s trademark sound quality returns with multiple ANC modes and ambient sound options for a range of situations. At $599, the high-end looks don’t come cheap, but if you’re looking for something beyond the pure plastic fashion of most headphones, M&D has you covered.
How to choose the best wireless headphones for you
When it comes to shopping for a good pair of wireless headphones, the first thing you’ll need to decide on is wear style. Do you prefer on-ear or over-ear headphones? For the purposes of our buyer’s guide, we focus on the over-ear style as that’s what most noise-canceling headphones are nowadays. Sure, you can find on-ear models with ANC, but over-ear designs are much more effective at blocking sound. Speaking of noise cancellation, you’ll want to determine early on if you even want that. If you frequently crank up the beats in noisy environments, you’ll want to not only make sure it’s there, but also make sure it’s good, preferably with adaptive ANC. If you plan to use your new headphones in quieter spaces, skipping ANC can save you some money.
The next area to consider is features. We recommend trying to get the most bang for your buck, but as you’re shopping around you should determine which items are must-haves and what you can live without. And don’t take basic things like automatic pausing and Bluetooth multipoint connectivity for granted, as not all companies include them. We also suggest reading reviews to see how well a company’s more advanced features work. This will help you decide if those are something you’re willing to (likely) pay extra for. Keep an eye on better battery life estimates to avoid disappointment, as some manufacturers promise more hours than real-world testing delivers. And don’t be easily swayed by lofty promises about call quality without verifying them.
Sound can be subjective, so we recommend trying before you buy if at all possible. We understand this isn’t easy at a time when we’re doing most of our shopping online. But trying on a set of headphones and listening to them for a few minutes can save you from an expensive case of buyer’s remorse. We also recommend paying attention to things like Spatial Audio, Dolby Atmos, 360 Reality Audio and other immersive formats. Not all headphones support them, so you’ll want to make sure a perspective pair does if that sort of thing excites you. If you plan to use your headphones for other media besides music, checking for latency is also a must — some delay can impact playback for things like movies or games, even if most true wireless headphones now offer minimal lag.
How we test over-ear headphones
The primary way we test wireless headphones is to wear them as much as possible. We prefer to do this over a one- to two-week period, but sometimes embargoes don’t allow it. During this time, we listen to a mix of music and podcasts, while also using the earbuds to take both voice and video calls. Since battery life for headphones can be 30 hours or more, we drain the battery with looping music and the volume set at a comfortable level (usually around 75 percent). Due to the longer battery estimates, we’ll typically power the headphones off several times and leave them during a review. This simulates real-world use and keeps us from having to constantly monitor the process for over 24 straight hours.
To judge the best Bluetooth headphones, we focus on higher-quality audio by listening to a variety of genres and paying close attention to how each style sounds. We also test at both low and high volumes to check for consistency in the tuning. To assess the quality of phone calls, we’ll record audio samples with the headphones’ microphones as well as have third parties call us.
When it comes to features, we do a thorough review of companion apps, testing each feature as we work through the software. Any holdovers from previous models are double checked for improvements or regression. If the headphones we’re testing are an updated version of a previous model, we’ll spend time getting reacquainted with the older set. Ditto for the closest competition for each new set of headphones that we review.
Other wireless headphones we tested
AirPods Max
Apple’s AirPods Max are premium, well-designed over-ear headphones that incorporate all of the best features you find on standard AirPods: solid noise cancelation, spatial audio and easy Siri access. However, their $550 starting price makes them almost prohibitively expensive, even for Apple users. There are better options available at lower prices, but if you can pick up the AirPods Max at a steep discount, they might be worthwhile for the biggest Apple fans among us.
Dyson On-Trac
The On-Trac headphones have an almost infinitely customizable design, and that’s what’s most unique about them. The sound profile offers some nice detail, but lacks dynamic range overall. ANC is average at best and there aren’t any advanced features that will make your life easier. Well, except for the hearing health monitor which is actually handy. All told, that’s not a lot in a set of $500 headphones.
Sonos Ace
The Sonos Ace is an excellent debut for the company’s first headphones. The combination of refined design, great sound quality and home theater tricks creates a unique formula. However, ANC performance is just okay and key functionality is still in the works for many users.
Sony ULT Wear
If most headphones don’t have the level of bass you desire, the ULT Wear is an option to consider. The low-end thump isn’t for everyone, but there are also plenty of handy features and a refined look to make the $200 set more compelling than many in this price range.
Sony WH-CH720N
While the WH-CH720N are a great affordable option, we prefer the Audio-Technica in the budget category. Sony’s cans are lightweight with good sound quality, but ANC struggles at times and they’re made with a lot of plastic.
Beats Studio Pro
The Studio Pro lacks basic features like automatic pausing, and multipoint connectivity is only available on Android. Moreover, they’re not very comfortable for people with larger heads. Overall sound quality is improved, though, and voice performance on calls is well above average.
Bose QuietComfort Ultra headphones
Bose’s latest flagship model has a lot to offer, but its trademark Immersive Audio feature can be inconsistent across different types of music. There’s still world-class ANC, excellent comfort and a clearer transparency mode, but for the price, the non-Ultra model is a better choice right now.
Master & Dynamic MH40 (2nd gen)
The MH40 are a great set of headphones if you favor crisp, clear and natural sound that isn’t overly tuned. This pair showcases the company’s affinity for leather and metal too, but limited customization and short battery life for non-ANC cans kept this set from making the cut.
Bowers & Wilkins Px8
The company’s trademark pristine sound is on display here, but the Px8 are more expensive and not nearly as comfortable as the Px7 S2.
Wireless headphones FAQs
How can you tell the quality of wireless headphones?
I typically look at three factors: design, sound quality and features. In terms of design, I’m usually looking to see if the build quality of the headphones feels cheap and plasticky. Plenty of companies use plastic, but they can do so in a way that doesn’t look or feel like budget models. For sound quality, I want to hear a nice, even tuning where highs, mids and lows are all well represented. No overly boomy bass or scooped out mids. I also want good clarity where you can pick up fine details and an open, immersive soundstage. Features is typically a distant third, but if a company doesn’t cover basic functionality (automatic pausing, transparency mode, multipoint Bluetooth, etc.) it can be an indication of overall quality.
How do I choose the best quality wireless headphones?
“Best” can be pretty subjective, but I always recommend going to a place where you can listen to the headphones you’re thinking about buying before you commit. Sometimes this isn’t possible, so you’ll want to check return policies. I also recommend doing some research to determine what your priorities are in a new set. Are you an audiophile who wants the best sound quality? Is powerful active noise cancellation (ANC) the most important? Would you rather have conveniences like automatic pausing?
Which brand has the best wireless headphones?
Sony consistently tops our list with its 1000X line. This is mostly due to the combination of sound quality, ANC performance and the truckload of features these headphones pack in. I’ll be the first to tell you that there are better sounding options and other companies, like Bose, offer more effective noise cancellation. But when you add everything up, no one comes close to the full slate of tools Sony puts in its premium headphone line.
Do expensive wireless headphones sound better?
Exorbitant price tags don’t mean better audio quality. Bowers & Wilkins’headphones are on the high end for wireless noise-canceling models and they sound amazing. However, Audio-Technica’s M50xBT2 is much more affordable and doesn’t have ANC, but these headphones have a warm, natural sound profile that I find very inviting. At the end of the day, it will come down to personal preference, but you don’t need to spend a lot to find great headphones.
Apple Music is one of the few streaming services that offers high-resolution audio (aka “lossless”) at no extra charge. But enjoying that extra quality on your phone usually requires some extra hardware. That is the purpose of this guide, — to help you find exactly what you need depending on how you prefer to listen. Every product listed below will help you squeeze more audio quality out of your Apple Music subscription. In fact, whatever music service you use, your listening experience will be enhanced. Best of all, most of these recommendations are compatible with Android, Mac and Windows devices, too.
Fortunately, as data plans become more generous and technology advances, listening to these larger-files in their full glory is less of a challenge. There are still some hardware hurdles though, especially if you use AirPods (or any wireless headphones) as Bluetooth technology is theoretically capable of delivering some higher-resolution audio, and Apple products don’t support the required technology (codecs such as Aptx, LDAC etc.). Confusingly, there are also different levels of “lossless” on Apple Music, with standard “CD quality” audio and then “Hi-Res Lossless” files that are recorded at even higher data rates. But don’t worry, we have a solution for you below, no matter how you prefer to listen to your music.
Of course, a DAC or dongle is only part of the equation — your headphones or speakers are also just as important. So if you’re looking for the absolute best audio experience be sure to check out our guide to the best headphones. Although these options are wireless, many can be used with a cable, too, making them the perfect pairing for our recommendations below.
Best DACs for 2025
James Trew for Engadget
Fiio’s affordable KA11 dongle contains a DAC with a maximum resolution of 32bit/384kHz — which is well above Apple Music’s top-tier “Hi-Res” lossless format (24bit/192kHz) — so you can be sure that you’re getting every last bit of quality out of whatever you’re listening to. Best of all, the KA11 is powerful, too, with a higher volume output than Apple’s on headphone adapter (more on this below). At around $30, this dongle is the best bang for your buck when it comes to upgrading the audio experience on your iPhone, Android, PC or Mac. There’s even a Lightning version available for those with older iPhones and iPads.
We particularly like the simplicity of Fiio’s KA11 as it’s plug-and-play with no need to charge it. It’s only slightly bigger than a typical headphone adapter and it comes with a rugged, woven cable, so it can handle a lot of wear and tear. There’s even a small LED on the front that lets you know if you’re listening to standard, high, or higher-resolution files so you can be confident you’re getting the most out of your music in real time.
Yes, it’s the Apple headphone adapter you know and (maybe) love, but it’s worth considering if you want something super lightweight and even more affordable. Apple’s dongle doesn’t support the larger, Hi-Res files available on its music service, but it can handle the standard lossless (24bit/48kHz) format no problem. As you’d expect, it’s available in Lightning and USB-C versions depending on which Apple device you’re connecting it to.
Sure, the most demanding listeners might lament the lack of support for the higher resolutions, and it can be a little quiet with some headphones that are high impedance (typically more expensive “audiophile” models). For the vast majority of users, though, Apple’s dongle will do the job. If you’re not sure, check the manual for your headphones and look for Impedance (often listed as Ohms) — anything below around 150Ohms and you should be fine. Anything above that, and you might want to consider Fiio’s dongle instead.
While this guide is primarily focused on Apple Music, most of the gear here will unlock lossless audio no matter where you listen. If Tidal is your platform of choice, you might be familiar with the MQA codec, which the company used for its high-resolution audio until eventually switching to FLAC in 2024. MQA might not be as common in streaming anymore, but if you still want to make sure you can listen to music from stores or services that provide it, the iFi GO Link will have you covered, along with the standard Apple Music high resolution audio formats, and anything else, up to 32-bit/384kHz.
Sennheiser’s BTD700 is a wireless adapter that plugs into your phone, upgrading its Bluetooth capabilities with the latest high-resolution codecs such as Aptx Adaptive and Aptx Lossless. iPhones don’t support any of these natively, but with this small dongle, you can unlock the full potential of Bluetooth audio and the higher bitrates (and in theory audio quality) Aptx Lossless offers. There’s a small caveat, though: you will need Bluetooth headphones that also support one of these codecs such as these or these (or check the product page of the set you own or are considering).
The BTD700 is simple to use, just plug it in to your phone’s (or other device’s) USB-C port, pair your headphones to it and off you go. An LED on the dongle lets you know which of the six different Bluetooth “qualities” (codecs) you’re enjoying so you will know when you’re listening to lossless audio. The handy part? Once you’ve paired your headphones with the dongle, you won’t need to re-pair if you connect the BTD700 to a PC or Mac. This little adapter effectively gives anything with a USB-C port an audio upgrade, and there’s even a low-latency mode for gaming. Note, there’s no Lightning option here, so if you’re on an older phone you might have to live with using an adapter.
If you’re looking to take things to the next level without spending “high-end” money, there’s a lot to love about the Melody DAC from Snowsky. Unlike a simple dongle, the Melody has onboard controls and two headphone jacks. One of those is for regular 3.5mm headphones, but the other is for 4.4mm “balanced” headphones, which means the Melody can grow with you if your audio journey takes you deeper into the world of audiophilia.
The wood finish gives it a classy feel and although it’s light, it still delivers that quality “Hi-Fi” feel. As for sound quality, there’s support for 384K/32bit sample rates, which covers everything Apple Music can deliver. The built-in amplifier can easily go louder than you should probably ever listen and there are other luxuries, too, such as support for inline microphones — so you can still handle calls and take meetings on your phone. We also love that you can tailor the sound to your preference via the Fiio Control companion app.
While you can squeeze an impressive amount of audio tech into a headphone adapter, a slightly bigger device affords a decent step up in both specs and features. Moondrop’s Moonriver T2i DAC is slightly larger than a pack of gum, and it has a stylish design that doesn’t look like a boring, generic dongle.
Importantly, the Moonriver T2i builds on the success of the company’s Moonriver 2 DAC. The “2” partly refers to the use of dual DAC chips here, which delivers a “balanced” signal. Each channel can handle up to 32bit/384KHz resolution and there are two headphone ports. One for standard 3.5mm headphones and another for 4.4mm connections — making use of that balanced output. If this is your first step into the world of Hi-Fi DACs, you’re totally fine with 3.5mm headphones, but some prefer the 4.4mm connector as it provides more power and potential signal benefits, especially if you’re using a headphone amp.
With the Moonriver T2i you have a couple more practical advantages. For one, there are physical volume controls on the device itself. If you ever felt that the 16 levels of loudness on the iPhone (I just counted) weren’t enough, then the 100 steps of adjustment on the Moonriver T2i (via companion software) eliminate any worries about setting the music to the perfect level. If your headphones have an in-line microphone, the good news is that this dongle will pass that through to your phone or PC so you won’t need a separate device for calls.
Most importantly, the sound that comes out of the Moonriver T2i is bright and bold. You’ll hear audiophiles talk about sound stage, detail and width, all you need to know is that this DAC ticks off all the buzzwords and serves up bright, robust sound that’s going to make any lossless/hi-res music really shine.
Who said a DAC needs to be a dongle? If you’re looking for something a little more all-in-one then the SP3 BT active speakers from Fiio are a great option. We like that, for the same price as many standalone DACs, you have everything you need to decode high-resolution music from almost any source with USB-C and Aux inputs for phones along with standard Hi-Fi connections such as optical, RCA and coaxial.
These speakers didn’t make it to our testing bench, but the SP3 BTs regularly receive praise for their sound and premium build quality at a reasonable price. For Bluetooth listening, there’s support for both Aptx Adaptive and HD along with Sony’s rival LDAC making these speakers something of an audio swiss-army knife. While these speakers will make a perfect companion to your home office or workspace, they can easily find a home in your living room or den connecting to any other music players you might have (for vinyl you’ll still need a pre-amp).
If you’ve had some experience with DACs and are looking to ratchet things up a notch or three, then the Mojo 2 from British company Chord wants to have a word. At $650, this is definitely in the high-end price range, but the experience and features it offers make it worth considering for serious audiophiles. But the brains behind the Mojo 2 have been making digital to analog converters pretty much since there was digital music to even convert. That experience is what makes the Mojo 2 a favorite among music fans.
Most options in this guide are designed for mobile devices first, the Mojo 2 is more of a hybrid device. The mobile dongles above all take their power from the player you connect them to, which is convenient, but obviously is less kind to your phone’s battery life. The Mojo 2 has an internal cell so won’t tax the one in your phone or laptop. It’s small enough to be portable, but substantial enough to live on your desk.
Unlike most DACs that use off the shelf chips to handle the digital-to-audio conversion, the Mojo 2 uses field programmable gate array (FPGA) technology to create its own custom “chip.” It’s also powerful enough to act as both a DAC and a preamp, driving even power-hungry headphones with ease. We’ve seen FPGA gain popularity in gaming circles for its ability to imitate various consoles, but that same flexibility is what makes it interesting to the audio engineers at Chord.
If you need something that’s capital L loud, then the Mojo 2 will not disappoint. Proceed with caution here. It’s actually powerful enough to drive two pairs of headphones at the same time and has two 3.5mm ports so you can do exactly that. The curious circular buttons can also be used to change sound profiles with an excruciating level of detail.
The Mojo 2 has standard USB-C, microUSB, optical and coax inputs so it’s more flexible than a lot of its competition in this regard. Although it’s worth noting that you can only charge the Mojo 2 via microUSB. Of course, there’s a cable provided for this, but if you’ve fully made the switch to USB-C, it’ll mean you have to guard the charging cable closely.
DAC stands for digital to analogue converter. A digital-to-analog converter takes the digital (D) music from your phone or computer and converts (C) it into analog (A) sound you can hear. All phones and PCs have them, but since handsets moved to USB-C, Lightning or Bluetooth for music, the task of converting that signal was generally outsourced to either your adapter or your wireless headphones.
DACs can be used with phones, laptops and desktops but tend to be much simpler than a regular external audio interface. One basic distinction is that DACs are usually for listening only whereas an audio interface might have ports to plug in microphones and instruments (but an external audio interface is also technically a DAC). Some high-end DACs even include XLR outputs for better connectivity with professional audio equipment.
The best DACs tend to be lightweight, making them more suitable for mobile use, although it still gets a little tricky with the iPhone as you still might need to add another dongle to make it play nice with Lightning. Also, not all DACs support all the higher audio resolutions like DSD. Most standalone DACs require external power or an onboard battery, though some can use the power from whatever you plug them into — in which case expect a hit to your battery life.
Why do I need new hardware to listen to music?
The short answer is, you don’t. You can play “hi-res” audio files on most phones and PCs, you just might not be getting the full experience. If your device’s audio interface tops out at 44.1 or 48kHz (which is fairly common and covers the vast majority of music online) then that’s the experience you’ll get. If you want to enjoy better sounding music at a higher sample rate and bit-depth (aka resolution), you’ll need an interface that supports it and wired headphones, potentially using a headphone amp for an enhanced experience.
It’s worth pointing out that “lossless” and “hi-res” are related terms, but not the same thing and will vary from service to service. Apple uses ALAC encoding which is compressed, but without “loss” to the quality (unlike the ubiquitous .aac or .mp3 file formats). CDs were generally mastered to at least 16-bit / 44.1kHz which is the benchmark that Apple is using for its definition of lossless. In audio circles, a general consensus is that hi-res is anything with a sample rate above 44.1kHz. Increasingly, though, the term is being used for anything 96kHz and above.
This, of course, isn’t only about Apple’s new streaming formats. External DACs and audio interfaces are a great way to get the best sound and upgrade your listening experience generally. Especially if you want to get into the world of more exotic (read: pricey) headphones, as they often even require a DAC to provide enough clean digital signal to drive them. For audiophile headphones, a phone or laptop’s internal sound chipset often doesn’t have the oomph needed to deliver a hi-fi experience, meaning a better DAC could make all the difference in sound quality.
Okay, but can’t I just use the headphone adapter for my phone?
No. Well, yes, but see above. A Lightning or USB-C to 3.5mm headphone adapter often is an audio interface and most of the ones you’re buying for $7 (or that come free in the box) do not support hi-res audio beyond 48kHz / 24-bit. Android is a little more complicated, as some adapters are “passive” and really just connect you to the phone’s internal DAC like old school headphones. Others (active ones) have a DAC built-in and good luck finding out what your specific phone and the in-box adapter delivers. (Hint: connect it to a PC and see if it comes up as an audio interface. You might find some details there if it does).
What about Bluetooth headphones?
Chances are that over the last few years you’ve migrated from wired to wireless headphones (thanks, Apple). The world of Bluetooth headphones changes things a little when it comes to seeking better audio performance. What matters here is twofold, the headphones you’re using (as those will technically be the “DAC”) and the codec — the method used to send the musical data over to the headphones.
It’s also worth checking to see if your headphones support aptX and which version. Look out for aptX HD, aptX Adaptive and (for the highest quality) aptX Lossless which are all better than standard and becoming more common, albeit slowly. It’s worth noting that both your phone or media player and your headphones need to support the same aptX codec. Currently, no iPhone supports any type of aptX, though dongles exist that will offer that functionality.
Other higher-resolution Bluetooth codecs exist, like Sony’s LDAC, but Qualcomm’s AptX has wider support thanks to its prevalence in Android devices. Some high-end wireless headphones might even come with a headphone jack for wired connections when higher-quality audio is needed.
Disclosure: Our goal is to feature products and services that we think you’ll find interesting and useful. If you purchase them, Entrepreneur may get a small share of the revenue from the sale from our commerce partners.
With so many calls and meetings taking place remotely these days, serious entrepreneurs and business leaders need reliable headphone options for blocking out distractions and zoning in on work. For those who are on the hunt for a highly capable piece of tech that’s also affordable, this deal is worth checking out.
For a limited time only, these new, open-box JBL Tune 510BT Wireless On-Ear Headphones are on sale for only $24.99 (reg. $49). An open-box deal typically means the product was excess inventory from store shelves, and it also means that these headphones have been inspected and verified to work like new.
So, with impressive savings on a fully capable pair of 2021 headphones, you can count on powerful and deep bass when listening to music. It also features quick switches to make switching from listening to a tune while you get through busy work to taking an unexpected and important call from a prospective client seamless.
These on-ear headphones also support Siri and Hey Google. With these tools, you can activate hands-free calling with a simple request and control sound settings and other functions with voice commands. They also offer a quick five-minute recharge feature that gives you two additional hours of music, which is great when you’re in a bind.
Busy entrepreneurs need the freedom to take calls while keeping their hands on their keyboards. Make your access to calls and meetings a lot better with these JBL Tune on-ear headphones.
Disclosure: Our goal is to feature products and services that we think you’ll find interesting and useful. If you purchase them, Entrepreneur may get a small share of the revenue from the sale from our commerce partners.
In a world where eight in 10 remote-capable professionals are working hybrid or fully remote (according to a Gallup survey), it’s crucial to have tools that support focus, concentration, and productivity, no matter where you are. An absolute must is a pair of wireless earbuds with noise cancellation.
While you can’t go wrong with a set like the Beats Studio Buds+ True Wireless, they can get a little pricey. However, if you grab an open-box pair, you can save 41% and get them for only $99.99, normally $169.99.
Open box: The trick for saving 41% on new buds.
What does open box mean? Exactly what it sounds like. Think of these earbuds as excess inventory from shelves that were shipped back to a warehouse, as they could no longer be sold. As a result, their packaging is imperfect, meaning you’re getting brand-new earbuds at a fraction of their usual retail price.
Your key to productivity.
But let’s focus more on how great the Beats Studio Buds+ True Wireless earbuds are for hybrid and remote hustlers. They have active noise canceling to help you tune out background noise, like while you’re trying to get work done at the coffee shop or airport, and a transparency mode so you can be aware of your surroundings, like if you want to order a muffin or cross the street without removing the earbuds.
The Beats Studio Buds+ have up to 36 hours of combined listening time with their case, meaning you can stay connected for virtual meetings or hands-free calls for several workdays before needing to recharge. The earbuds also have on-ear controls for managing calls and dual-beam microphones that help filter out external noise for high-quality sound.
Disclosure: Our goal is to feature products and services that we think you’ll find interesting and useful. If you purchase them, Entrepreneur may get a small share of the revenue from the sale from our commerce partners.
Finding time to focus can take any professional time. One Phase Undock study found it takes some workers nearly 24 minutes to get focused on any task. Try focusing with a pair of Beats Studio Pro Wireless Noise-Cancelling Headphones that offer an immersive audio experience with active noise canceling and transparency mode, and they’re only $179.99.
No more distractions.
No more little distractions getting to you when you’re trying to power through a tough problem. These headphones let you customize your listening experience, whether that means activating transparency mode so you can hear if someone asks you a question or using total noise canceling to immerse yourself in audio.
These headphones are equipped with a custom acoustic platform and a 40mm active driver and deliver rich, stunning sound with increased audio fidelity. The integrated digital processor optimizes frequency responses for a powerful and balanced sound profile, ensuring crystal clear calls and wireless freedom for users.
Fully charged, these headphones could deliver up to 40 hours of audio, and music isn’t the only thing they do. The headphones feature on-device controls, so you can take calls, control your music, and activate Siri with multi-function on-ear controls. Additionally, they seamlessly switch between Apple and Android devices, ensuring compatibility with a wide range of tech devices.
The Beats headphones come in open-box condition, typically considered excess inventory from store shelves, and are verified to be in new condition before being repackaged.
Time to focus.
Give yourself the tools to laser focus on the tasks at hand, whether it’s powering through your inbox or listening back to the audio of a meeting.
Disclosure: Our goal is to feature products and services that we think you’ll find interesting and useful. If you purchase them, Entrepreneur may get a small share of the revenue from the sale from our commerce partners.
According to TeamStage, entrepreneurs work an average of 52 hours a week. That’s a lot more than the standard 9-5 individuals work as employees, which means it’s even more important to ensure you’re giving your mind a break. If your preferred way to unwind is by relaxing with a podcast or binging the latest must-watch series, an iPad is a great device to have for a breather.
iPads are a convenient way to take a load off, thanks to their portable size and ability to house multiple apps. But they typically come with a hefty price tag, which makes refurbished models an ideal option. Right now, you can snag a bundle that includes a refurbished Apple iPad Air and renewed Beats Flex Wireless Headphones — all for just $114.99, the best price available on the web.
From Netflix to classic games like Candy Crush, an iPad can house plenty of apps that will help you relax. This refurbished Apple iPad Air has 16GB of storage to keep them all on the device. A 5MP rear camera and 1.2MP FaceTime camera, along with the dual microphone, make collecting memories and staying connected to friends and family easy.
You’ll also receive renewed Beats Flex Wireless Headphones to help you enjoy your content. They come with a flex-form cable that offers all-day comfort and four ear tip options to get a perfectly personalized fit. In addition, they’re tangle free and offer up to 12 hours of listening time, so you can binge away without worrying about running out of juice.
The iPad Air hails from 2013 and comes with a Grade “A” refurbished rating, which means it will arrive in near-mint condition, with potential light scuffing on the bevel or case, or light scratches or dents on the body. And the Beats Flex are renewed, which means they’re tested, cleaned, and repackaged into original packaging.
Huawei’s latest smartwatch is capable of holding and charging wireless earbuds.
The innovative, two-in-one watch is called “Watch Buds” and has been confirmed by the Chinese tech giant. “Watch Buds” will feature a digital smartwatch face and ear-bud charging case embedded underneath, according to The Register. Owners will be able to push a button, triggering the watch’s face to open and reveal the underlying earbuds.
The design of the “Watch Buds” is similar to Huawei’s Watch GT series, sharing specs like steel casing and a leather strap. It’ll operate on Huawei’s HarmonyOS.
Huawei Central received an exclusive look at the Watch Buds. Take a look below.
Scroll to Continue
Huawei had originally planned to announce the “Watch Buds” on December 2nd. However, the death of former CCP General Secretary Jiang Zemin resulted in the mass cancellation of many product announcements in China. The watch’s release date is now unclear.
Once it does become available, consumers in the United States looking to buy the smartwatch may run into difficulties. The Biden administration recently cracked down on Huawei, whose telecommunications products they say present “an unacceptable risk” to U.S. national security, Reutersreported. The company had been placed on the U.S. Commerce Department’s “Entity List” in 2019.
Bowers & Wilkins’ Px7 S2 wireless headphones are only a few months old, but they sound like they’ve been out for years, having gone through numerous iterations and updates to strive for quality. High-quality sound, an affordable price and plug-and-play ease make these headphones a strong contender amongst its competitors. A quick listen with these headphones will undoubtedly sell you at its HiFi price of $399.
In addition to the plethora of features the PX7 S2 headphones arrive with, they feature a few physical buttons on them so users can toggle their mobile device’s voice assistant, turn the headphones on and off, adjust the volume, toggle between the noise cancellation modes, and enable Bluetooth.
Sound Quality
I’ve been using these headphones over the past few months and am very impressed with their sound quality. While I primarily listen to dance music, I’ve ventured out and pushed these headphones to the limit with other genres and styles. They hold up very well, and everything in the sounds clear and heard as the artists intended.
The Px7 S2 headphones are built around Bowers & Wilkins’ new acoustic platform to deliver 24-bit high-resolution audio. This level of sound quality is achieved through newly developed drive units that are carefully placed inside the earcups. The company claims that this immersive listening experience brings the listener closer to the stereo sound of their reference quality 800 Series Diamond loudspeakers, which are used in major recording studios around the globe.
“Our Px7 S2 headphones use carefully engineered 40mm drive units that are inspired by the technologies used in those same reference-class loudspeakers,” Andy Kerr, Director of Product Marketing and Communications, tells EDM.com. “We don’t focus on just one aspect of sound quality – for example, powerful bass. Everything we do is designed to minimize distortion and deliver the utmost realism across the whole frequency range, from the highest sounds to the lowest. Distortion is the unwanted bending and flexing of any drive unit that impairs its ability to deliver accurate sound. Think of it like a misshapen musical instrument – one that still works, but which no longer produces the sound that it ought with the clarity that it should.”
Active Noise Cancellation
Bowers & Wilkins upgraded the active noise cancellation in the Px7 S2 headphones. It features six upgraded high-performance microphones that actively cancel out exterior noise while immersed in a listening session. Bowers & Wilkins’ focus for these headphones is achieving a sound quality that is as close as possible to how the original artist intended for their audio to be heard–with no sacrifices.
Blue Bowers & Wilkins Px7 S2 Wireless Headphones Macro Shot
Bowers & Wilkins
Microphones
The carefully positioned microphones for the active noise cancellation also work well for phone calls. I’ve tested this on FaceTime, and it does work really well. I’m very impressed with the sound quality of the microphone as well as the incoming audio from the other caller.
Mobile Application
Bowers & Wilkins’ mobile app allows for seamless use of the Px7 S2 headphones. I’ve used it extensively, and it’s very easy to use.
Scroll to Continue
The Px7 S2 headphones are the first headphones by the audio company to seamlessly integrate with their music app. It allows the user to control various features of the headphones, including the preferred level of noise cancellation or EQ. The music application recently received an update that allows users to integrate their favorite music streaming service right into the app. The streaming services include TIDAL, Deezer and Qobuz.
Build Quality
The build quality for the Px7 S2 headphones is superb. The memory foam earpads wrap your ears really well and ensure maximum comfort while listening. These are one of the first pairs of headphones that I’ve used where my ears don’t get fatigued from long listening sessions. Additionally, the slimmer design and lighter weight make the Px7 S2 headphones easy to wear for long periods of time without fatigue.
The headphones come in three different finishes: Black, Blue, and Grey.
“I’m incredibly proud of our new Px7 S2 headphones,” Stephanie Willems, brand president of Bowers & Wilkins, said in a press release. “They’re supremely comfortable, beautiful to look at and sound great. They’re the perfect way to take True Sound with you everywhere you go.”
The headphones come with two cables: USB-C and 3.5mm audio connections.
Bowers & Wilkins Px7 S2 Wireless Headphones
Bowers & Wilkins
Battery Life
The Px7 S2 headphones boast a whopping 30 hours of battery life on a single charge. This will, however, vary depending on how loud or quiet you’re playing the audio, and if you’re using active noise cancellation. These features typically use more battery.
A full recharge for the Px7 S2 headphones only takes two hours, while a 15-minute quick charge can provide an additional seven hours of battery life.
While using the headphones, I’ve been able to experience the long battery life on them. I’ve bounced between having noise cancellation on and off and transparency mode with loud and quiet volume levels, and the headphones have been able to keep up really well.
You can learn more and purchase the Px7 S2 headphones for $399 here.
Incredible discounts offered on doctor-recommended TV listening systems, headsets and speakers during its weeklong Black Friday sale
Press Release –
Nov 22, 2022
SPRING VALLEY, Calif., November 22, 2022 (Newswire.com)
– There may be no battle more contested over the holidays than the volume of a living room television.
But thanks to an innovative television listening solution and a weeklong Black Friday sale, this year’s holidays may sound a bit clearer and less jarring to others in homes across the U.S. and beyond.
TV Ears® Doctor Recommended TV Listening Systems & Headsets is pleased to announce from midnight Wednesday, Nov. 23 to 11:59 p.m. Wednesday, Nov. 30, all orders are eligible for a full 35 percent off of regular price using the promo code THANKS35.
“It is gratifying to be able to offer our TV listening systems this holiday season at a record low price,” said Nino Wehbe, TV Ears general manager. “Since 1998, we have been working to help millions of customers enjoy their favorite television programs, news and sports. With this offer, we look forward to helping countless more.”
Featured in AARP Magazine, the easy-to-use tool has a five-year warranty and works with all hearing types, he said.
“While new technologies come out every day, they are often difficult to use and often fail to deliver the crisp and clear volume needed to positively impact television watching,” Wehbe said. “Our solution is different. We specifically designed TV Ears to be a simple solution that allows anyone to enjoy watching television.”
He said Bluetooth headphones and hearing aids are notoriously unreliable for this purpose and can create an unrewarding experience.
“With TV Ears, there is no complicated pairing process required to use it correctly,” Wehbe said. “Unlike rivals, TV Ears products provide an enjoyable and hassle-free TV listening experience without relying on Bluetooth and its inconsistent sound quality.”
TV Ears utilize proprietary Voice Clarifying Technology to create clear, real-time television audio for the wearer.
“For more than 20 years, TV Ears has assisted people in hearing television clearly without disturbing others,” Wehbe said. “Using Voice Clarifying Circuitry, TV Ears manufactures and sells voice-clarifying television headphones and speakers. This proprietary audio curve makes television dialogue clearer while background noise, such as music and sound effects, is reduced.”
“With TV Ears’ Speed of Light Infrared Technology (SoLIT) and ‘wall-breaking’ 5.8 GHz technology, television audio can be distributed throughout the house to compatible headsets and speakers,” he continued. “And with a max volume of 120 decibels, TV Ears is twice as loud as other systems, with no pairing required.”
“For those parents, grandparents, aunts and uncles dealing with hearing loss, being able to connect with others through entertainment like music and television can mean everything,” Wehbe said. “With our Black Friday deal, you can give the gift of gathering and celebration this year, and at a low cost.”
For more information about TV Ears or to take advantage of the weeklong Black Friday sale, visit https://www.tvears.com.
Leading retailer launches new website for easier access to doctor recommended TV Listening Systems
Press Release –
Nov 11, 2022 19:00 PST
SPRING VALLEY, Calif., November 11, 2022 (Newswire.com)
– TV Ears, Inc, a leading retailer of Doctor Recommended TV Listening systems and in preparation for the 2022 Holiday Shopping season, has unveiled the launch of its new website https://www.tvears.com. In addition to an enhanced overall user experience, the new website features two new products, the 5.8 Digital Headset System and 5.8 Digital Speaker System. For over 20 years, TV Ears has been helping people hear TV clearly without disturbing others. TV Ears manufactures and sells voice clarifying TV headsets and speakers with Voice Clarifying Circuitry®, a proprietary technology that automatically adjusts the audio curve to increase the clarity of television dialogue while decreasing the volume of background noise such as music and sound effects. TV Ears devices incorporate Speed of Light Infrared Technology™ (SoLIT) for in room listening and newer “wall-breaking” 5.8 Ghz technology to send television audio to compatible headsets/speakers throughout the home. At 120 decibels, TV Ears systems provide twice the maximum volume and do not require pairing. Unlike its competitors, all TV Ears products are designed to provide a hassle-free and enjoyable TV listening experience without relying on Bluetooth and its inconsistent audio quality (volume/delay/range).
As seen in AARP Magazine, the TV Ears Original Headset & Transmitter System and its unique features, were invented following the realization that hearing aids alone simply do not work well-enough for TV listening. Out of this frustration, the company developed the Original system and its subsequent products to not only enhance the overall TV Listening experience for hearing impaired individuals but allow families & couples to enjoy watching TV together – all with unique audio preferences. “Put on your TV Ears and hear TV without disturbing others.”
The new website features a refreshed responsive design/layout, a new customer support and resources area to assist customers in choosing the right system for their specific needs. For a limited time, and in celebration of its new site launch, users can take advantage of a special discount and save with up to 25% with promo code “TVE25.”
Take advantage of discounts just in time for Black Friday and explore the new TV Ears website at https://www.tvears.com. Press inquiries and additional requests are advised to visit https://www.tvears.com/support or call TV Ears, Inc. Toll-Free at (888)-883-3277 Monday – Friday 6 AM to 6 PM PST.
TV Ears® has helped millions of customers hear TV clearly since 1988. It’s doctor-recommended voice clarifying device uses proprietary Voice Clarifying Circuitry®, Voice Enhancement Technology and Speed of Light Infrared Technology™ (SoLIT) to make even the softest of sounds and most challenging of accents more understandable to the human ear. TV Ears has been featured in AARP Magazine and comes with a free 5-year warranty. Experience a better television listening experience and hear every word without disturbing others with TV Ears.
