ReportWire

Tag: travel and transportation

  • Live animal transport regulations not ‘fit for purpose’, major international study finds

    Live animal transport regulations not ‘fit for purpose’, major international study finds

    Newswise — A ‘fitness check’ of regulations in five countries meant to protect animals during transportation, has deemed that they all fall short of fully protecting animals during transport. Findings from this interdisciplinary work involving animal welfare scientists and a law lecturer which compared animal transport rules designed to protect the billions of livestock that are transported on lengthy journeys in Australia, Canada, New Zealand, EU (including UK) and US, highlights serious failures.

    The study, published in Royal Society Open Science today [Wednesday 24 January], and involving researchers from the Universities of Bristol, Essex and British Columbia (Canada), is the first comprehensive fitness check of live animal transportation regulations in five English-speaking Western countries to assess whether the regulatory framework for a policy sector is fit for purpose.

    Live animal transport, which affects most farm animals at some point during their lifetime, is a stressful experience whereby animals are often subjected to long transport times during which they are prevented from drinking, eating and resting. For example, in Canada some animals can be transported for 36 hours without feed, water and rest.

    Researchers investigated four major risk factors associated with live animal transportation – fitness for transport, journey duration, climatic conditions and space allowances – and explored how regulations were structured to prevent animal welfare issues.

    Results from this research showed that all countries could improve and draw key future directions for new policies. For instance, no countries adopt maximum journey duration for all animals, meaning that animals can sometimes be transported for days. Not all countries mandate regular rest stops for long journeys but those that do often mandate rest stop times that are too short to allow meaningful recovery. Updating the transport regulations using the most recent science would be an important step towards improved animal welfare during transport, bringing the livestock industries more in line with societal values.

    The team also considered recent and proposed changes to the regulations. These included reviewed changes that have been announced but not yet been translated into legislation or different options that are being considered. For instance, last month (December 2023), a Bill including a ban on the export of livestock for slaughter and fattening from Great Britain (i.e., England, Scotland and Wales, but not Northern Ireland) was introduced in Parliament but may only target a minority of animals being exported.

    Dr Ben Lecorps, study co-author and Animal Welfare Lecturer in the Bristol Veterinary School, said: “Our findings indicate that regulations are often insufficient or too vague to ensure they are fit for purpose. All studied countries fall short in guaranteeing adequate protection to livestock during transport. Whilst this does not mean that all animals transported will experience serious harms, major risk factors such as excessively long journeys, or journeys during hot weather, are not being addressed to a satisfactory level.”

    Dr Eugénie Duval, study co-author and Lecturer in Law at the Essex Law School, added: “Even if they do not necessarily reflect the latest scientific evidence, some regulations are more specific than others. If we were to take the best from each regulatory framework (e.g. fitness for transport in Canada; providing species-specific thresholds for the temperature inside vehicles in the EU) and apply some of the propositions made by some countries (e.g. a ban of export outside the EU borders: proposition of some EU Member States), the ensuing regulations would be a major step closer to safeguarding animal welfare during transportation.”

    The study was funded by a grant awarded to ED and MvK by the Humane Slaughter Association and the Hans Sigrist Research Prize awarded to MvK by the Hans Sigrist Stiftung Foundation.

    Paper

    ‘Are regulations addressing farm animal welfare issues during live transportation fit for purpose? A multi-country jurisdictional check’ by Eugénie Duval, Benjamin Lecorps, Marina A.G. von Keyserlingk in Royal Society Open Science [open access]

    University of Bristol

    Source link

  • Idaho National Laboratory to play a key role in Midwest hydrogen hub

    Idaho National Laboratory to play a key role in Midwest hydrogen hub

    Newswise — As the United States works to achieve net-zero carbon emissions by 2050, different energy sectors will require different solutions.

    Renewables and nuclear energy will help decarbonize electricity production, and the light-duty transportation sector will reduce emissions primarily by switching to electric vehicles. Natural gas will continue to displace coal-fired power plants as carbon capture and sequestration also advances.

    But other energy sectors are more difficult to decarbonize. Many industries require more than just electricity to run their processes. Some, such as steel and cement production, also need heat, while the ammonia used to make fertilizer requires hydrogen. And today’s batteries charge too slowly and are too heavy to efficiently power semitractor-trailer trucks and other heavy machines.

    To solve these challenges, experts envision an economy where carbon-free hydrogen serves as a transportation fuel, a chemical precursor, an energy storage medium and a source of high temperature heat for industry.

    Now, Idaho National Laboratory is poised to play a key role in forming a hydrogen economy. On Oct. 13, the Midwest Alliance for Clean Hydrogen, LLC (MachH2) announced that it was selected by the U.S. Department of Energy’s (DOE) Office of Clean Energy Demonstrations to develop a Regional Clean Hydrogen Hub. The MachH2 hub is one of seven hydrogen hubs planned by DOE.

    The hub will establish a supply chain for producing, storing, distributing and using hydrogen. The hub is expected to create thousands of jobs during construction and operation.

    INL researchers will lead efforts to identify potential end users, perform technoeconomic analyses, and develop and commercialize next generation hydrogen and advanced nuclear technologies for the hub.

    The supply chain starts with hydrogen produced and used across three states:  Illinois, Indiana and Michigan. MachH2 will use electrolysis technology and three main energy sources — nuclear energy, renewable energy and natural gas with carbon sequestration.

    Hydrogen can go to storage facilities or be delivered to end users that could include hydrogen-powered buses, freight trucks, and glass, chemical, fertilizer and steel manufacturing, and eventually, sustainable aviation fuel production.

    “One of the reasons we went to Michigan, Indiana and Illinois is that they are central to the nation’s freight sector,” said Seth Snyder, an INL researcher and chief commercialization officer­ for the hub. “We’re creating a hydrogen corridor, an ecosystem around hydrogen.”

    Design and buildout of the hydrogen hub is expected to start immediately, followed by construction within a year and operation of the hub within five years. Project managers estimate the seven hydrogen hubs will collectively cut 25 million metric tons of carbon dioxide emissions each year — roughly equivalent to the emissions from 5.5 million gasoline-powered cars — and create tens of thousands of jobs.

    The hydrogen economy is within reach

    Recent advances in carbon-free hydrogen production technologies — specifically low- and high-temperature electrolysis — have brought the idea of a hydrogen economy within reach. Much of this progress is due to investments from DOE’s Hydrogen and Fuel Cell Technologies Office.

    For now, nuclear and renewable hydrogen production will rely mainly on low-temperature electrolysis, a commercially available technology that uses electricity to split water into hydrogen and oxygen.

    Federal funding for the hub is up to $1 billion, which will allow the team to evaluate how deployment and use of up-and-coming technologies such as high-temperature electrolysis — which splits high-temperature steam instead of water — and advanced nuclear reactors could improve energy efficiency and reduce carbon dioxide emissions.

    “INL will continue to look at advanced nuclear applications and high-temperature electrolysis, which is more efficient, to accelerate it toward commercialization,” Snyder said.

    INL is the premier laboratory in the nation for demonstrating high temperature electrolysis. Researchers at the laboratory helped lay the groundwork for the MachH2 hub to use the technology by helping industry develop solid oxide electrolysis cells and by setting up hydrogen production test platforms for companies to demonstrate their technologies.

    The efficiency of high-temperature electrolysis is 20% to 25% higher than low temperature electrolysis. Plus, the process is carbon-free if you use the high-temperature heat and electricity supplied by a clean energy source like nuclear during times of low grid demand.

    To help mature these technologies for the MachH2 hub, INL has proposed a 4- to 10-megawatt (MW) hydrogen proving ground at its desert site.

    “We want to get high-temperature electrolysis up to speed,” Snyder said. “Now we’re demonstrating 1 megawatt systems, and we need to get it to 10 megawatt and beyond.”

    INL has also partnered with industry for low- and high-temperature hydrogen production demonstrations at three commercial nuclear power plants in the United States. Some of these systems began operation in 2023.

    These demonstration projects have helped prove technologies and reduce the technical, economic and safety risk of coupling nuclear reactors with hydrogen plants.

    Technoeconomic and life cycle analysis

    In the near term, INL, along with Argonne National Laboratory, Northwestern University and the University of Michigan, will support MachH2 by providing the technoeconomic and life cycle analyses of the hydrogen hub.

    INL’s technoeconomic analyses will include modeling the construction and operation of the various components of the hub and determining how the economics of those components fit within the marketplace. The life cycle analysis — performed by Argonne — will eventually determine the carbon dioxide emissions reductions, using operational data to confirm the calculations and predictions.

    “We are going to be spending time and resources to basically determine how the infrastructure should be operated and look for ways to incorporate technologies that INL is researching,” said Dan Wendt, an INL researcher who leads the technoeconomic analysis team. “That includes how the hub could use advanced nuclear and high-temperature electrolysis to further improve impacts and economics.”

    Certain aspects of the technoeconomic analysis will be investigated using HERON, a modeling tool set that determines optimal integrated energy system configurations and operating strategies to maximize economics. It’s a complicated question. Researchers will need to build a model capable of balancing the demands of the grid with the needs of hydrogen consumers while considering the overall economics for the entire system.

    “We want to know how these systems are going to work together to achieve the greatest impact while still being economically competitive,” Wendt said.

    The chicken or the egg?

    In the end, the hydrogen hub is a complex mixture of several different hydrogen sources and many different projects including transportation networks, storage facilities and a multitude of end users.

    By integrating these components into a single system, MachH2 “helps address the chicken and egg question,” Wendt said. “What comes first, the markets or the production capability? It gives you a foothold for helping the hydrogen economy take off.”

    “Our team can play a major role in helping inform how the MachH2 hub components can work together to ensure reliability, competitiveness and large impacts in CO2 reductions,” he said.

    The MachH2 hub represents “a transformative opportunity for the lab,” Snyder said.

    Richard Boardman, INL lead for Nuclear-Hydrogen Systems Integration, agreed.

    “As the lead lab for nuclear energy applications, INL will use its computational and testing capabilities to ensure the commercial success of hydrogen production and use by industry,” he said. “The express purpose of INL’s capabilities is to validate electrolysis stacks and integrated electrolysis modules that are capable of flexible operations.”

    To learn more about INL’s research on hydrogen, visit https://inl.gov/integrated-energy/hydrogen/.

    Idaho National Laboratory (INL)

    Source link

  • Grant Helps Program Expand Distracted Driving Education to Online Learning

    Grant Helps Program Expand Distracted Driving Education to Online Learning

    The National Highway Traffic Safety Administration (NHTSA) estimates there were 42,795 deaths resulting from motor vehicle crashes in 2022 in the United States. This projection is close to the previous year fatality numbers, which were the highest in 16 years.

    A Herbert Wertheim School of Public Health and Human Longevity Science at University of California San Diego program aims to improve safety for all roadway users, including drivers, pedestrians and cyclists with support from a $360,000 grant from the California Office of Traffic Safety through the NHTSA.

    To inform and promote safe driving, the UC San Diego Training, Research and Education for Driving Safety (TREDS) provides courses, online training, and written materials designed to equip law enforcement, clinicians and other roadway safety professionals with the knowledge and tools necessary to educate the public. These free courses cover topics such as impaired driving due to alcohol, cannabis and prescription medications, pedestrian safety, refresher education for older drivers, and prevention of distracted driving.

    Distracted driving is any activity that diverts attention away from primary task of safe driving, especially talking or texting using an electronic device. Emphasizing the dangers of distracted driving to the public is a priority for TREDS this upcoming year.

    It’s estimated that every 30 seconds in the U.S., there is a crash involving drivers using cellphones. A recent report from NHTSA shows there were 362,415 injuries and 3,552 deaths in 2021 resulting from a driver who was distracted.

    “Distracted driving is dangerous,” said Linda Hill, M.D., M.P.H., Distinguished Professor in the Herbert Wertheim School of Public Health and TREDS program director. “Sending a text while behind the wheel takes your eyes off the road for almost five seconds. At 55 miles per hour, this is the equivalent of driving the length of an entire football field with your eyes closed.”

    TREDS initiated the “Just Drive – Take Action Against Distraction” educational curriculum in 2013, which has been taught statewide by safety professionals in worksites and communities. To expand the reach of the program, TREDS will develop an online version of the educational curriculum this year that can be accessed by anyone at no charge. The program emphasizes the risks and consequences of distracted driving, as well as strategies to avoid this dangerous behavior. 

    “Injuries and deaths due to distracted driving occur much too often and the impact can be devastating,” said Hill. “With increased education and awareness, these crashes are 100 percent preventable. Crashes are not ‘accidents’ – 95 percent are due to poor choices made by drivers. With elimination of these risky antecedent behaviors, the roads will be safer for everyone.”

    TREDS offers additional traffic safety education and training programs, including an online class (“Steer Clear – Decide to Drive Sober”) that targets teens to prevent driving under the influence. 

    For more information about the program or to request a training, contact TREDS at 858-534-8386 or email [email protected].

    University of California San Diego

    Source link

  • Zeroing in on EV batteries with more storage and faster charging

    Zeroing in on EV batteries with more storage and faster charging

    Newswise — Currently, the biggest hurdle for electric vehicles, or EVs, is the development of advanced battery technology to extend driving range, safety and reliability.

    New research has shown how a novel lithium-based electrolyte material (Li9N2Cl3) can be used to develop solid-state batteries that charge faster and store more energy than conventional designs. Experiments revealed the solid-electrolyte was not only stable in normal air environments, but it also inhibited the growth of dendrites — dangerous, branchlike formations that cause batteries to catch fire.

    Oak Ridge National Laboratory scientist Jue Liu conducted neutron experiments to observe how lithium moved through the material.

    “The material’s dry air stability, efficient lithium-ion transport, and high compatibility toward metallic lithium are crucial advances. It’s the best of both worlds,” he said. “It offers all the performance benefits of liquid-electrolyte batteries that we use every day, but it’s safer and more reliable.”


    Journal Link: Science Advances

    Oak Ridge National Laboratory

    Source link

  • Using AI to develop hydrogen fuel cell catalysts more efficiently and economically

    Using AI to develop hydrogen fuel cell catalysts more efficiently and economically

    Newswise — Proton exchange membrane hydrogen fuel cells (PEMFCs) used in hydrogen vehicles use expensive platinum catalysts to facilitate the oxygen reduction reaction at the anode. There are a vast number of elemental combinations and compositions that need to be explored to develop more efficient and cost-effective catalyst materials than platinum, and researchers are still doing a lot of trial and error in the lab.

    The Korea Institute of Science and Technology (KIST, President Seok Jin Yoon) announced that Dr. Donghun Kim and Dr. Sang Soo Han of the Computational Science Research Center, Dr. Jong Min Kim of the Materials Architecturing Research Center, and Prof. Hyuck Mo Lee of the Department of Materials Science and Engineering at the Korea Advanced Institute of Science and Technology (KAIST, President Kwang Hyung Lee) have presented a new artificial intelligence-based catalyst screening methodology and succeeded in developing a new catalytic material based on a ternary element-based alloy (Cu-Au-Pt) that is cheaper and performs more than twice as well as pure platinum catalysts.

    The team developed Slab Graph Convolutional Neural Network (SGCNN) artificial intelligence model to accurately predict the binding energy of adsorbates on the catalyst surface. This is not the first application of AI to materials discovery. The SGCNN model was developed by evolving the CGCNN model, which is specialized in predicting bulk properties of solid materials, to predict surface properties of catalytic materials.

    However, there is a big difference between predicting bulk properties and surface properties. When you can quickly and accurately predict the surface properties of a catalyst, you can more efficiently screen for catalysts that meet the triple bottom line of material stability, performance, and cost. In fact, when developing fuel cell anode reaction catalysts using this methodology, we were able to explore the potential of nearly 3,200 ternary candidate materials in just one day, a scale that would have taken years using the density functional theory (DFT) adsorption energy simulation calculations traditionally used to predict catalyst properties.

    The researchers developed a novel ternary (Cu-Au-Pt) alloy catalyst through experimental validation of 10 catalysts with the potential to outperform platinum catalysts out of approximately 3,200 candidate materials. The catalyst uses only 37% of the element platinum compared to pure platinum catalysts, but the kinetic current density is more than twice as high as that of pure platinum catalysts. The catalyst also exhibits excellent durability, with little degradation after 5,000 stability tests.

    “In the future, we plan to continue to build high-quality adsorption energy data and perform more sophisticated AI modeling, which will further improve the success rate of catalytic material development,” said Dr. Kim of KIST. The new methodology has the advantage of being immediately applicable not only to catalysts for hydrogen fuel cells, but also to various catalytic reactions such as water electrolysis-based hydrogen production, which is essential for the realization of the hydrogen economy. The team plans to further reduce the unit cost and improve the performance of the developed catalysts through material and system optimization.

     

    ###

    KIST was established in 1966 as the first government-funded research institute in Korea. KIST now strives to solve national and social challenges and secure growth engines through leading and innovative research. For more information, please visit KIST’s website at https://eng.kist.re.kr/

    The research was supported by the Samsung Future Technology Fostering Project (SRFC-MA1801-03) of Samsung Electronics (CEO Kye-hyun Kyung) and the Materials Research Data Platform Project of the Ministry of Science and ICT (Minister Jong-ho Lee), and was published in the international journal Applied Catalysis B: Environmental.

    National Research Council of Science and Technology

    Source link

  • Rating platforms drive sales at tourist-area NYC eateries

    Rating platforms drive sales at tourist-area NYC eateries

    Newswise — Ratings on platforms such as Yelp and TripAdvisor can greatly impact high-priced New York City restaurants that service tourists, but have less of an effect on restaurants frequented by “locals” outside of tourist areas, according to new Cornell research.

    “In neighborhoods frequented by ‘locals,’ the advent and expansion of internet-based ratings platforms did not result in greater disparities in restaurant sales despite how ubiquitous they are and how frequently we anecdotally use them,” said Jason Greenberg, associate professor of management and organizations at the Peter and Stephanie Nolan School of Hotel Administration in the Cornell SC Johnson College of Business.

    Greenberg co-authored the paper, “Rating Systems and Increased Heterogeneity in Firm Performance: Evidence From the New York City Restaurant Industry, 1994-2013,” published Aug. 28 in Strategic Management Journal. The paper was co-authored with New York University Stern School of Business faculty Gino Cattani and Joe Porac and former Stern doctoral student Daniel Sands, now of University College London.

    Locals have firsthand information and experience with restaurants in their area, so they know the nuances of different offerings, Greenberg said. Consequently, they are less reliant on rating platforms. Tourists, on the other hand, lack this firsthand information, so they must rely on rating platforms to inform their choices.

    “When we look for a place to eat – particularly for a special or high-cost meal – we want to know if the meal and experience will be good,” he said. “Rating platforms help provide this information. In turn, consumer choices based on these platforms impacts comparative business performance and all that entails for the businesses and their workers.”

    To discern and measure the impact of internet-enabled rating platforms on restaurant performance, Greenberg and fellow researchers set out to gather continuous ratings information both before and after the proliferation of digital rating platforms. They also needed performance measures for thousands of private businesses.

    Greenberg’s approach was to apply for and gain access to restricted-access government data that included private companies’ sales information. “I also acquired paper copies of Zagat guides on eBay and Amazon and then digitized those ratings so that I could have a continuous timeseries of ratings that goes back to 1994, before the advent and expansion of online rating platforms,” he said.

    This research is valuable for restaurant owners and managers because it identifies consumers who seek, and are influenced by, ratings platforms as tourists and consumers of the highest-cost restaurants, Greenberg said. It also underscores the importance of tuning into the nuanced information those consumers seek and need.

    “One New York City restaurateur we interviewed reflected on the increased importance of receiving and maintaining favorable ratings, saying: ‘It’s not about ego. That’s how you make money,’” Greenberg said. “The bottom line is that to compete in a fragmented and competitive market like the restaurant market, owners and managers must be attuned to the nuances and codes of rating platforms.”

    Ratings are valuable in helping consumers make choices; they also have implications for business performance that impact all stakeholders in a business.

    “As the late food writer and critic Anthony Bourdain put it, ‘Food is everything we are,’” Greenberg said. “Consequently, it’s vital to understand the factors that underlie and influence business competition and performance.”

    Cornell University

    Source link

  • Expert available: NASA report into UFOs

    Expert available: NASA report into UFOs

    NASA is releasing a report today on Unidentified Anomalous Phenomena – commonly known as UFOs. A live streamed media briefing, headed by Nasa boss Bill Nelson and other leaders, will begin at 3pm BST from the Washington headquarters.

    Dr Chris Pattison, from the Institute of Cosmology and Gravitation at the University of Portsmouth, is available for comment and media interviews. He can discuss: 

    What is the NASA report likely to reveal?

    What are UAPs?

    What are the challenges with identifying them?

    Why is NASA taking potential UAP sightings more seriously?

    Comment on the hearing this week in Mexico where someone claimed to show actual aliens to congress.  More info here  

    Chris has recently written this article on the subject: https://theconversation.com/ufos-what-well-learn-from-the-nasa-panel-investigating-sightings-207328
    He also has a YouTube channel 

    University of Portsmouth

    Source link

  • Park funding boosts home values

    Park funding boosts home values

    Newswise — Ohio residents who vote against tax renewals for parks and recreation spending could be costing themselves a significant amount of wealth in the form of their homes’ value, a University of Cincinnati economist found.

    David Brasington, PhD, the James C. and Caroline Kautz Chair in Political Economy and professor of economics in UC’s Carl H. Lindner College of Business, studied the effect of cutting funding for the maintenance of local parks and recreational areas on housing values for a research article that was published in Journal of Regional Science.

    Brasington found Ohio communities that vote to renew parks and recreation spending see 13% higher home values three years after the vote than similar communities that voted against the tax renewals. For the typical household, a vote against tax renewals saves $70 a year in taxes but costs $30,000 in house values.

    “I was surprised by how strong the magnitude was,” Brasington said. “A 13% difference in house prices is really big. I was surprised a relatively small change in park funding could cause such a big change in house prices over time.”

    In his research, Brasington focused on communities that according to data from the U.S. Census Bureau share similar demographic and economic characteristics. The only discernible difference was that some of them narrowly voted to renew tax levies while others narrowly voted against renewing their levies.

    Using a housing data set, Brasington compared home values in the communities from 1991 through 2016.

    While house prices didn’t reflect a change immediately, three years after the votes the communities that approved the park and recreation maintenance saw 13% higher house values compared to the communities that voted against their levies. In subsequent years, the gap continued to grow.

    “I didn’t find any effects the first year after the vote or the second year after the vote, but they were noticeable three years later,” Brasington said. “The findings I have are consistent with the idea that right after you vote to cut parks and recreation taxes and funding, you don’t notice any effects on house prices, but as time goes on, maybe this decrease in maintenance funding starts to be noticeable and maybe it’s reflected in house prices.”

    The data doesn’t mean that communities that vote against renewing tax levies see a 13% decrease in housing values or that communities that vote in favor of their levies see a 13% increase. Rather, an example could be one community seeing a 7% increase in housing values while another sees a 20% increase, Brasington said.

    “When a local government offers services, they’re competing with other local governments for residents and businesses to build their tax base, so they want to offer good services that people care about,” he said.

    The data shows parks are a service that people care about, Brasington said. It also shows that Ohio’s local parks might be underfunded.

    “Parks and recreation spending seems worth it in Ohio,” he said. “There may be places where it isn’t, there may be places where it’s really, really worthwhile. But overall the parks and recreation spending is worth it in Ohio because the estimate is just an average across all the communities.”

    Brasington’s findings on home prices aligns with his previous research on the value of local park funding. In a research article published in 2021, Brasington found communities that renewed tax funding for local parks had more residential development than those that cut park taxes and funding.

    University of Cincinnati

    Source link

  • Newly Developed BIM-based Digital Design Workflow for Road Safety Improvement

    Newly Developed BIM-based Digital Design Workflow for Road Safety Improvement

    Newswise — The Korea Institute of Civil Engineering and Building Technology (KICT, led by President Kim Byung-suk) developed a digital model designed to identify dangerous roads where traffic accidents frequently occur while further finding optimal measures to improve the safety of such roads, thereby minimizing the risk of traffic accidents.

    The Korean Ministry of Land, Infrastructure and Transport, jointly with the country’s local government agencies, has been implementing a project titled the “Alignment Improvement Project for Dangerous National and Provincial Roads”to prevent traffic accidents. This project aims to identify roads with a high risk of major traffic accidents and improve structural hazards found on them, preventing future traffic accidents and enhancing their functionalities as well. Under this project, dangerous roads are selected based on a combination of various factors, including their geometry, e.g., how the roads curve and slope, the number of traffic accidents, the amount of traffic, regional characteristics, and investment expenditures. Among them, however, geometry is the most significant factor in the scoring system. Simply put, the geometric structure of roads, which determines their overall shape, is considered among the major causes of traffic accidents.

    The existing procedure for a feasibility study for the safety improvement of dangerous roads is composed of sequential steps, including traffic accident analysis, dangerous road identification, and improvement measure establishment. Each step is conducted according to the corresponding manual and also in a fragmented manner. Among the steps of this feasibility study, formulating and designing a route plan for a single dangerous road costs about $30,700(40 million Korean won) and takes a period of more than one and a half months.

    Against this backdrop, a research team led by Dr. Hyounseok Moon at KICT’s BIM Research Cluster developed a digital design model to create an optimized linear road model capable of identifying dangerous roads and minimizing the risk of traffic accidents on them. The developed digital design model employs big data to ensure that dangerous roads are identified and selected in an objective manner, unlike the existing method in which the selection process is conducted in a fragmented manner. Furthermore, this model is capable of creating an optimal digital road model that effectively addresses geometric safety issues found in the selected roads and minimizes the risk of traffic accidents on them.

    The developed digital optimization model for dangerous roads was employed to conduct a feasibility study on a single road. Priority determination based on traffic analysis and assessments, followed by the formulation and design of alternative linear routes, all cost about $23,000(30 million Korean won) and took a period of two to three weeks at the minimum. This means that the developed digital design optimization model for dangerous roads reduces the required cost and period by 30-35% on average.

    This research outcome was achieved as follows. First, the Traffic Accident Analysis System (TAAS), a traffic accident big data system provided by KoROAD, was analyzed to identify and select dangerous roads, thereby determining the relationship between geometric factors and the occurrence of traffic accidents. In doing so, a total of 37,128 traffic accidents (especially fatal ones) that occurred on the country’s national and provincial roads from 2012 to 2020 were analyzed. Among them, 1,138 cases (accounting for 3%) were then selected, which satisfied specific conditions, for example, accidents that occurred on curved roads or inclined roads. From the ones selected above, 77 cases were further selected in which two or more traffic accidents occurred. These 77 traffic accident cases were considered to have occurred on dangerous roads, and an in-depth examination based on topographic-map and road-view analyses was further conducted on four cases among them.

    The digital model developed by KICT was designed to quickly and easily provide multiple optimal alternatives to the selected road design in the form of a 3D model simply by inputting conditions and entering values for variables. In addition, it can also compare these alternatives in terms of the risk of traffic accidents and the volume of earthwork required, immediately determining whether each of these alternatives satisfies the design requirements. This process allows policymakers to determine which alternative will be the best solution to minimize the risk of traffic accidents.

    The distinctive advantage of the developed technology is that it integrates the entire process of decision-making, from the identification of dangerous roads to the generation of optimal alternatives using a digital model; that is, maximizing the efficiency of the process via digital transition.

    Dr. Hyounseok Moon said, “This technology developed by KICT can be applied not only to road alignment improvement projects but also to the rapid, digital design of new, safe roads, and it will be widely used as one of the key technologies by combining various ICT solutions, including big data and AI, thereby ushering into the era of digital transformation in the construction industry.”

     

    ###

    This research was funded by the “Creation of Intelligent Technology-based Alignment Improvement Model for Dangerous Roads and Development of Key Technology for Geometric Verification (2021-2022, jointly conducted by Seoyoung Engineering”project implemented by the Ministry of Land, Infrastructure and Transport (Korea Agency for Infrastructure Technology Advancement) as a research project for promoting road construction and traffic technology.

    National Research Council of Science and Technology

    Source link

  • Enhancing urban planning through virtual reality

    Enhancing urban planning through virtual reality

    Newswise — Lab kit for urban scenarios

    Construction measures that transform urban settings change the environment of both the people who live there permanently and those who visit them temporarily. It’s not always possible to foresee the effects in advance. In such cases, it helps to recreate the setting in a 3D model which people can experience through immersion. To this end, the cartographers working with Marco Weißmann use software that was originally designed to programme computer game environments. “We’ve developed a lab kit of sorts in which you can simulate an environment virtually, complete with traffic,” explains Weißmann. The researchers can use it to directly visualise the effects of planned structural changes: how does the traffic flow? Do cars and pedestrians get in each other’s way or not?

    Measuring the implicit effects of spaces

    Moreover, the space that surrounds us affects our well-being. We do notice it sometimes, but not always. “People who’ve lived on a noisy street for a long time, for example, might think they don’t even hear the noise anymore,” says Julian Keil. “But we know that, objectively speaking, residents in such streets experience significantly higher stress levels than others.” In order to determine such implicit effects of urban planning measures before a lot of money has been poured into them, the cartography team developed a method to measure them in advance. For this purpose, they programmed an urban environment in virtual reality and had test participants experience the scenarios. At the same time, they measured the skin conductivity of the test persons, which provides information about their stress level.

    They showed that a higher traffic volume in a street clearly upset the test persons, as measured by their skin conductivity. To corroborate their findings, a study is planned to incorporate more physical measurements that will provide information about the participants’ stress levels and various emotions, including heart rate, blood pressure and pupil size. “Until now, residents and other stakeholders have been involved in the planning stage of construction measures, but only in the form of surveys, i.e. explicit statements,” says Keil, whose background is in psychology. “Our method enables spatial planners to assess implicit effects of possible measures and to include them in the planning, too.”

    Climate-friendly experiments

    The experiments for both studies were conducted in a climate-friendly way using electricity from a mobile solar system on the roof of the institute building.

    Ruhr-Universitat Bochum

    Source link

  • Possible? Climate-neutral air travel

    Possible? Climate-neutral air travel

    Newswise — Researchers at the Paul Scherrer Institute PSI and ETH Zurich have performed calculations to work out how air traffic could become climate-neutral by 2050. They conclude that simply replacing fossil aviation fuel with sustainable synthetic fuels will not be enough. Air traffic would also have to be reduced. The researchers are publishing their results today in the journal Nature Communications.

    The European Union aims to be climate neutral by 2050, a target that was set by the European Parliament in 2021. Switzerland is pursuing the same goal. The aviation sector, which is responsible for 3.5 percent of global warming, is expected to contribute its fair share – especially since the greenhouse gas emissions of aircraft are two to three times higher per passenger or freight kilometre than in other transport sectors. The International Civil Aviation Organisation (ICAO) and many airlines have therefore announced their intention to reduce CO2 emissions to zero by 2050 or to become climate neutral.

    In a new study, researchers at PSI and ETH Zurich have now calculated whether this can be achieved, and how. “An important question is what exactly we mean by zero carbon or climate neutrality,” says Romain Sacchi of PSI’s Laboratory for Energy Systems Analysis, one of the study’s two lead authors. If this is only referring to the CO2emitted by aircraft actually in the air, adds his co-author Viola Becattini from ETH Zurich, this does not go nearly far enough. Because assuming that air traffic continues to grow as it has in the past, the calculations predict that the CO2emissions of aircraft will only account for about 20 percent of their total climate impact by 2050. In order to make aviation as a whole climate neutral, it is necessary to ensure that not only flying but also the production of fuel and the entire aviation infrastructure have no further impact on the climate.

    However, the study concludes that this cannot be achieved by 2050 using the climate measures that are currently being pursued in flight operations. “New engines, climate-friendly fuels and filtering CO2 out of the atmosphere in order to store it underground (carbon capture and storage, or CCS) will not get us there on their own,” says Marco Mazzotti, Professor of Process Engineering at ETH. “On top of this, we need to reduce air traffic.”

    Non-CO2 effects play a major role

    In their study, Sacchi and Becattini looked at various different scenarios. These showed, on the one hand, that while the climate impact of the infrastructure, i.e. manufacturing aircraft and building and operating airports, does need to be taken into account, it is comparatively small overall for the period up until 2050 and beyond. The impact of flying itself on the climate, and of the emissions from producing the fuel are far greater. That in itself was nothing new.

    What had been less clear before was the importance of so-called non-CO2 effects, which occur in addition to CO2 emissions. The bulk of the greenhouse effect caused by aviation is not due to the carbon released into the atmosphere by burning aviation fuel, but to the particulate matter (soot) and nitrogen oxides that are also released and that react in the air to form methane and ozone, water vapour and the condensation trails that lead to the formation of cirrus clouds in the upper atmosphere. “Many analyses and ‘net zero’ pledges so far have ignored these factors,” says Romain Sacchi. “Or they have not been calculated correctly.”

    It is customary to express emissions and effects like these in terms of CO2 equivalents when calculating the overall balance. “But the methods and values used to date have proved to be inappropriate,” says Marco Mazzotti. “We therefore adopted a more precise approach.” The methods they used take into account one major difference between the various factors: non-CO2 effects are much more short-lived than CO2, which is why they are also called “short-lived climate forcers”, or SLCFs for short. While about half of the emitted carbon dioxide is absorbed by forests and oceans, the other half remains in the air for thousands of years, dispersing and acting as a greenhouse gas. Methane, on the other hand, has a much greater impact on the climate, but decomposes within a few years; contrails and the resulting clouds dissipate within hours. “The problem is that we are producing more and more SLCFs as air traffic increases, so these are adding up instead of disappearing quickly. As a result, they exert their enormous greenhouse impact over longer periods of time,” says Viola Becattini. It’s like a bathtub with both the drain and the tap open: as long as the tap lets in more water than can escape through the drain, the bathtub will keep getting fuller – until eventually it overflows.

    Climate-friendly fuel alone does not achieve the goal – but it helps

    “But this analogy also demonstrates that the crucial lever is under our control: the volume of air traffic,” Romain Sacchi points out. “By flying less instead of more often, in other words closing the tap instead of opening it, we can actually cool the atmosphere and push the greenhouse effect caused by aviation towards zero.” This is not to say that we must stop flying altogether. The calculations performed in the study show that for aviation to achieve climate neutrality by 2050, air traffic will need to be reduced by 0.8 percent every year – in conjunction with underground carbon dioxide storage – if we continue to use fossil fuels. This would bring it down to about 80 percent of today’s volume by 2050. If we manage to switch to more climate-friendly fuels based on electricity from renewables, 0.4 percent per year will be sufficient.

    The study also took a closer look at these new fuels. Researchers around the world are working to replace conventional petroleum-based engines. As in road transport, this could be achieved by using electric batteries, fuel cells or the direct combustion of hydrogen. However, the available energy density is only sufficient for small aircraft on short routes, or in the case of hydrogen also for medium-size planes on medium-haul flights. Yet large aircraft on long-haul flights of more than 4000 kilometres account for the majority of global air traffic and greenhouse gas emissions from aviation.

    Synthetic aviation fuel has pros and cons

    In addition, propulsion technologies for the aviation industry based on electricity or hydrogen are far from being ready for a widespread roll-out. So-called Sustainable Aviation Fuel (SAF) is therefore viewed as the industry’s great hope. This man-made aviation fuel could replace petroleum-based aviation fuel more or less one-to-one, without the need to redesign turbines and aircraft.

    SAF can be produced from CO2 and water via a production cascade. The CO2 is extracted from the air using a process known as air capture, and hydrogen can be obtained from water by electrolysis. “If the necessary processes are carried out entirely using renewable energy, SAF is virtually climate-neutral,” says Christian Bauer from the PSI Laboratory for Energy Systems Analysis, who was involved in the study. “This makes us less dependent on fossil fuels.” Another advantage of SAF is that it produces fewer SLCFs, which would have to be offset by capturing equivalent amounts of CO2 from the air and storing them underground. This is significant because CO2 storage capacity is limited and not reserved exclusively for the aviation industry.

    Air tickets three times more expensive

    SAF also has certain disadvantages though, in that it takes far more energy to produce than conventional aviation fuel. This is mainly because producing hydrogen via electrolysis takes a lot of electricity. In addition, energy is lost at every step in the production process – air capture, electrolysis and synthesisation. Using large amounts of electrical power, in turn, means expending more resources such as water and land. SAF is also expensive: not just in terms of the electrical power required, but also the cost of carbon capture and electrolysis plants, which makes it four to seven times more expensive than conventional aviation fuel. In other words, the widespread use of SAF makes carbon-neutral aviation a possibility, but it also costs more resources and more money. This means that flying will have to become even more expensive than it already needs to be in order to meet the climate targets. “Anyone buying a ticket today can pay a few extra euros to make their flight supposedly carbon neutral, by investing this money in climate protection,” says Romain Sacchi. “But this is greenwashing, because many of these measures for offsetting carbon are ineffective. To fully offset the actual climate impact, tickets would have to cost about three times as much as they do today.”

    “Such a hefty price hike should significantly reduce the demand for flights and bring us closer to the goal of climate neutrality,” says Viola Becattini. In addition, SAF production is expected to become cheaper and more efficient over the years as quantities increases, and this will have a positive effect on the carbon footprint. The study took such dynamics into account – including the fact that the electricity mix used to produce SAF is shifting. This distinguishes the analysis from most others.

    “The bottom line is that there is no magic bullet for achieving climate neutrality in aviation by 2050,” says Sacchi. “We cannot continue as before. But if we develop the infrastructure for storing CO2 underground and producing SAF quickly and efficiently, while also reducing our demand for air travel, we could succeed.”

    Paul Scherrer Institute

    Source link

  • Philadelphia I-95 bridge collapse: Warning signs and potential lessons

    Philadelphia I-95 bridge collapse: Warning signs and potential lessons

    Philadelphia I-95 bridge collapse: Warning signs and potential lessons

    University of Delaware

    Source link

  • Vehicle stop study illuminates importance of officer’s first words

    Vehicle stop study illuminates importance of officer’s first words

    BYLINE: Travis Williams

    Eugenia Rho believes in the importance of first impressions, especially during vehicle stops.

    An assistant professor in the Department of Computer Science, Rho is the lead author of a new research paper that illustrates how a law enforcement officer’s first 45 words during a vehicle stop with a Black driver can often indicate how the stop will end.

    “We found that there’s a key difference in how officers talk to Black drivers during the first moments of stops that end in an arrest, handcuffing, or search versus those that don’t end in such outcomes,” said Rho, who leads the Society, AI, and Language (SAIL) research lab at Virginia Tech. “Simply put, the officer starts off with a command rather than a reason in escalated stops.”

    Published in the Proceedings of the National Academy of Sciences of the United States of America, the peer-reviewed research also found that Black men could often predict a stop’s outcome simply by listening to those same 45 words, which generally spanned less than 30 seconds.

    “There’s a clear linguistic signature to escalated vehicle stops. It was discerned by trained coders, computational language models, and perhaps most importantly, by Black male citizens,” Rho said.

    Rho began this research as a postdoctoral researcher at Stanford University, working alongside Jennifer Eberdhardt, a professor of organizational behavior and psychology, and Dan Jurafsky, a professor of computer science and linguistics.

    The research team, which also included researchers from the University of Michigan, analyzed audio recordings and transcripts from police-worn body cameras from 577 vehicle stops that occurred over the course of a month in a medium-sized, racially diverse city in the U.S. The data included stops that ended in arrest, handcuffing, or searches and those that did not, but did not include any stops in which force was used.  

    One reason the team decided to focus on Black drivers was they were disproportionately represented in the data, according to Rho.  

    “We limited the study to Black drivers because less than 1 percent of the escalated stops included non-Black drivers in our sample,” Rho said. “We included both male and female drivers, but escalated stops were predominately male drivers.”

    The data was used in two studies included in the paper, one focused on officer language used during a traffic stop’s earliest moments and a second aimed at better understanding the perception of Black men when hearing those same words. A third section of the paper includes a case study that examines the first moment of the traffic stop involving George Floyd in May 2020.

    Dissecting the dialog

    In the first study, researchers used computational linguistics and hand annotation to analyze the transcripts by identifying dialog acts, such as greeting, commands, questions, reasons, and more.

    “Dialog acts are like conversation road maps, Rho said. “They show not only what the speaker is trying to do – like ask a question or give an order – but also how that piece of conversation fits into the larger discussion, helping to guide what might be said next.”

    When analyzing the findings, controls were set in place to account for factors that could impact the language used, such as the reason the driver was pulled over, the area’s crime rate, and more.

    “During vehicle stops, officers might ask for ID, explain why the driver was pulled over, or give a ticket. We were interested in how the balance of these dialog acts might differ between escalated and non-escalated stops,” Rho said.

    Findings

    The study found that the stops ending in escalation were almost three times more likely to begin with the officer issuing a command to the driver and 2 1/2 times less likely to provide a reason for the stop.

    “We found that stops that end escalated, often start escalated,” Rho said.

    Evaluating the experience

    During the second study, researchers played the audio from the traffic stops in the first study to a nationally representative sample of 188 Black male U.S. citizens ranging in age, region, education, and political ideology. Each participant was asked to listen to 10 stops at random – five that ended in escalation and five that did not – from the perspective of the driver and were then surveyed about their feelings and predictions for the stop’s outcome. 

    Findings

    Black male participants appeared to use officer language as a guide to whether they believed the stop would end with the driver being handcuffed, searched, or arrested. They predicted that 84 percent of stops that involved an officer giving orders with no reasons would escalate. In addition, they worried about force being used in more than 80 percent of the stops that involved orders and no reasons as compared to only 47 percent of stops that involved reasons with no orders.

    A present pattern in other stops?

    Having found escalated vehicle stops carry a unique “linguistic signature” – the officer gives an order without stating the reason for the stop – the researchers wanted to see if the same signature was present in stops that involve force. As a case study, the team examined the initial moments between Floyd and the officer who first approached him during the highly publicized encounter on May 25, 2020.

    Findings

    In less than 30 seconds of Floyd’s interaction with the officer, the officer delivered 57 words across nine speech turns, made up only of physical orders. Floyd, in his 11 speech turns, extended apologies, sought reasons for the stop, declared innocence, expressed fear, and pleaded with the officer. Yet every dialog act from Floyd was met with a singular response from the officer: an order.

    Better practices, better relations

    At a time when vehicle stops ending in the use of force often gain national attention, Rho said the team felt it important to better understand police-citizen interactions during more common vehicle stops. 

    “The most common way for the average citizen to encounter law enforcement is through vehicle stops,” Rho said. “So we really wanted to better understand how we can improve communication between officers and citizens during those encounters.”

    While both studies reveal valuable insights, Rho said she hopes the observation is not where the reach of this paper ends.

    “We want this study to really start conversations around how we can inform training around de-escalation practices for law enforcement and potentially a better understanding of how to facilitate relations between Black communities and law enforcement as well,” Rho said.

     

    Virginia Tech

    Source link

  • Americans walk less frequently and less safely compared to other countries

    Americans walk less frequently and less safely compared to other countries

    Newswise — A stroll through international statistics about walking reveals the grim reality of foot travel in the United States.

    “People walk less in the United States because it’s more dangerous to walk here and walking conditions are worse compared to other countries,” said Ralph Buehler, professor of urban affairs and planning at Virginia Tech. “So we’re caught in a bit of a spiral that discourages walking and encourages driving in the U.S.”

    For over a decade, Buehler and his co-authors have analyzed walking rates, pedestrian safety, and government policies across multiple industrialized nations, cities within the same nation, and multiple sections of the same city. A recent article published in Sustainability,  an international, peer-reviewed, open-access academic journal, updates the findings from prior peer-reviewed work published in Transport Reviews, the American Journal of Public Health, and TRNews. The findings show that overall Americans walk less than individuals in many other countries while also having a higher walking fatality rate per kilometer walked.

    “We were interested in figuring out how more people can walk while increasing pedestrian safety,” said Buehler, who completed the project with John Pucher of Rutgers University. “Walking doesn’t have to be a means of transport of last resort. There are tools and policies out there to make it safer and more attractive.”

    The researchers utilized a variety of government statistics, including travel surveys, national censuses, and traffic study databases, throughout their research. Their study also examines a variety of measures to increase pedestrian safety and the impact of those measures on walking rates.

    According to the study, Americans make fewer than half of the walking trips per day compared to Britons, yet are about six times more likely to be killed while walking per mile traveled. Those disparities remain relatively consistent on both fronts when the U.S. is compared to several other European nations, including Germany, Denmark, and the Netherlands.

    The 11 countries studied from 1990-2020 all saw pedestrian fatalities per capita decrease over that span, but the numbers dropped substantially less in the U.S. Americans had a 26 precent decrease compared to 78 percent in the U.K., for example. More troubling, while other countries continued to improve pedestrian safety from 2010-20, the U.S. was the only country to have a rise — up 25 percent — in pedestrian fatalities.

    “It’s not only that walking is less safe in the U.S., the trends in walking safety are going in the wrong direction,” Buehler said.

    Other findings of the study include walking rates being highest for short trips, women having a higher walking rate than men, and walking rates generally decreasing as income levels increase. The U.S. is also an outliner in the latter category. Americans are the only group where the highest income bracket walked more than the middle class. The researchers say this is likely due to the gentrification of many central city areas since 2000, where walking is safe and convenient.

    Buehler said the U.S. has a long history of creating policies that promote driving while restricting pedestrians.

    “The U.S. invented the term, ‘jaywalking,’ it doesn’t exist in most other languages,” Buehler said. “The history is really fascinating because in the late 1890s and early 1900s, pedestrians were everywhere in the streets, but cars needed that space, so they sort of get pedestrians out of the streets with all these campaigns. And they were successful of course because no one today would say the street is a safe place for pedestrians.”

    And that mindset has guided much of the country’s infrastructure planning as it has grown during the past century.

    “We have designed our communities around the automobile, and a lot of our engineering guidelines for roads have been built to facilitate car movement,” he said “Roadway designers don’t want to delay vehicles, and, guess what, pedestrian-friendly amenities like crosswalks delay cars. It’s not so much that the guidelines are purposefully anti-walking, they are pro-driving, but they do at the same time making walking less attractive.”

    Based on the successes of other countries, the study suggests steps governments could take to promote safe walking.

    Steps toward better designs

    A cultural shift that better prioritizes pedestrians during the roadway planning process is needed. This could include the incorporation of networks of clearly-marked, well-lit sidewalks and crosswalks and safety islands built into intersection corners and medians, as well as rethinking road placement and deemphasizing designing for speed.

    “We in the U.S. walk less even though there are a large number of trips that would be short enough,” Buehler said. “For example, Northern New Jersey has roughly the population density of the Netherlands, but it’s been planned for cars. So across the street you can see your destination, but because in between there is a six-lane roadway with no crosswalk, it’s very dangerous or impossible to get there.”

    Steps toward better land use

    Along with more pedestrian-friendly street designs, thinking through the creation of more walkable communities should include revamping zoning laws and regulations to allow for more mixed-use spaces.

    “The land use really matters,” Buehler said. “If we keep defining neighborhoods as places without corner stores, day cares, doctors’ offices, and things of daily necessity, we’re forcing people to drive because distance will be long and there really will not be a choice.”

    Steps toward better driving habits

    Lower speed limits, enforced by both police and traffic cameras, as well as tightened laws related to drunk and distractive driving could greatly benefit safety for both drivers and walkers. Also needed is the revision of laws and their enforcement to put more responsibly on drivers.

    “If a pedestrian gets hit, we often sort of blame the victim,” Buehler said. “We have to put the responsibility of avoiding that on the people who operate the two-ton machines rather than the people who are walking and have no physical protection around them.”

    Steps toward better transportation education

    Many countries with safer walking rates also have more restrictive driving regulations. Similar efforts, compounded with more proactive education programs related to both walking and driving for youth, could greatly increase the overall safety of both activities.

    “One of the most dangerous jobs in the US is that of a crossing guard,” Buehler said. “So it’s very dangerous, even around schools, for kids to walk to schools. As a result, parents decide to drive them to school and then there are even more cars driving around those schools.”

    What steps can you take?

    As the warmer weather makes walking more attractive, it also provides an opportunity to play a critical role in making communities safer for foot travel.

    “People who are out and walk daily, they know about dangerous situations, they know about the sidewalk missing links, they know about the traffic signals that don’t work,” Buehler said. “They have to talk to their local politicians, their town and city engineers, because what we’re finding again and again is those folks don’t really know what’s out there.”

    About Buehler

    Buehler is a professor of urban affairs and planning in the School of International and Public Affairs at Virginia Tech in the greater Washington, D.C., metro area. His research areas focus on understanding individual travel behavior and the sustainability of transport systems in urban areas. His is also the co-editor of the books “Cycling for Sustainable Cities” and “City Cycling.”

    Virginia Tech

    Source link

  • Development of self-healing lens material to prevent traffic accidents in self-driving cars

    Development of self-healing lens material to prevent traffic accidents in self-driving cars

    Newswise — Safety issues of self-driving cars have emerged due to frequent self-driving traffic accidents. A self-healing lens material that can prevent car accidents that occur due to signal distortion by restoring scratches on the sensor surface of the self-driving car has been developed.

    The Korea Research Institute of Chemical Technology (KRICT, President Lee, Young Kuk) research team led by Dr. Kim Jin Chul, Park Young Il, and Jeong Ji-Eun* and Prof. Kim Hak-Rin and Prof. Cheong In Woo in Kyungpook National University (KNU) developed a material that heals scratches on the sensor of an autonomous vehicle.
    * Technology from「Can scratches on car surfaces disappear when exposed to sunlight? : A new self-healing coating material」, published in 2022, has been further developed to enable not only structural recovery but also functional recovery such as recovery of an optical signal.

    When this self-healing optical material is used in the sensor of an autonomous vehicle, it is expected that the life expectancy of the product can be increased and future technology that can prevent malfunctions due to surface damage can be secured.

    A lens is a tool that collects or disperses light and is used in many everyday optical devices such as cameras, cell phones, and glasses. However, if the lens surface is damaged by a scratch, the image or optical signal received by the optical device can be severely distorted.

    Recently, traffic accidents caused by recognition errors and malfunctions of vision systems* such as LiDAR sensors and image sensors of self-driving cars have repeatedly occurred. As a result, confidence in the safety of self-driving cars is rather low**.
    * LIDAR sensors and image sensors that acts as the ‘eyes’ of an autonomous vehicle
    ** The results of a survey by the American Automobile Association showed that the number of respondents who were afraid of using self-driving cars increased by 13% from 55% in 2022 to 68% in 2023.

    The KRICT-KNU joint research team developed a transparent lens material that can remove scratches on the sensor surface within 60 seconds when focused sunlight is irradiated using a simple tool such as a magnifying glass.

    Because self-healing is favorable when molecular movement within the polymer is free, flexible materials are generally advantageous in securing excellent self-healing performance. However, lenses or protecting coating materials are made of hard materials, and thus it is very difficult to impart a self-healing function. To solve this problem, the research team combined a thiourethane structure, which is already being used as a lens material, and a transparent photothermal dye* to design a ‘dynamic chemical bond’ in which the polymers repeat disassembly and recombination under irradiation of sunlight.
    * A dye that converts light energy into heat energy

    In particular, the developed transparent organic photothermal dye can selectively absorb light of a specific near-infrared wavelength (850-1050 nm) without interfering with the visible light region (350-850 nm) used for image sensors and the near-infrared region (~1550 nm) used for LiDAR sensors.

    When sunlight is absorbed by photothermal dyes, the surface temperature of the developed lens material rises as the light energy is converted into thermal energy. Subsequently, the increased surface temperature makes it possible to self-heal a surface scratch by repeating the dissociation and recombination of chemical bonds in the polythiourethane structure.

    The developed lens material shows perfect self-healing even when scratches cross each other, and provides excellent resilience, maintaining 100% of the self-healing efficiency even if the process of scratching and healing at the same location is repeated more than five times.

    Dr. Lee Young Kuk, president of KRICT, said, “This technology is a platform technology that synthesizes self-healing lens materials using both an inexpensive high-refractive polymer material and a photothermal dye. It is expected to be widely used in various applications such as autonomous vehicle sensors as well as glasses and cameras.”

     

    ###

     KRICT was established as a government-funded research institute in 1976. It has played a leading role in the development of the national chemical industry as it developed technologies for chemical and related fields of convergence, transferred chemical technologies to industries, produced professionals in the chemical field, and provided tremendous support for a variety of chemical infrastructures. Now we promise to reach new heights in chemistry and chemical engineering and continue our role in facilitating increased use of the knowledge from research. For more information, please visit KRICT’s website at https://www.krict.re.kr/eng/

    This study was supported by the New Career Researcher Program of the National Research Foundation of Korea and Korea Research Institute of Chemical Technology (KRICT). The research was published in the Feb 2023 issue of ‘ACS Applied Materials and Interfaces‘(IF: 10.383), an international scientific and technological journal.

    National Research Council of Science and Technology

    Source link

  • Researchers create high-temp, extreme environment sensors

    Researchers create high-temp, extreme environment sensors

    Newswise — Extreme environments in several critical industries – aerospace, energy, transportation and defense – require sensors to measure and monitor numerous factors under harsh conditions to ensure human safety and integrity of mechanical systems.

    In the petrochemical industry, for example, pipeline pressures must be monitored at climates ranging from hot desert heat to near arctic cold. Various nuclear reactors operate at a range of 300-1000 degrees Celsius, while deep geothermal wells hold temperatures up to 600 degrees Celsius.

    Now a team of University of Houston researchers has developed a new sensor that was proven to work in temperatures as high as 900 degrees Celsius or 1,650 degrees Fahrenheit, which is the temperature mafic volcanic lava, the hottest type of lava on Earth, erupts.

    “Highly sensitive, reliable and durable sensors that can tolerate such extreme environments are necessary for the efficiency, maintenance and integrity of these applications,” said Jae-Hyun Ryou, associate professor of mechanical engineering at UH and corresponding author of a study published in the journal Advanced Functional Materials.

    The article, which was featured on the cover of the journal, is titled “Piezoelectric Sensors Operating at Very High Temperatures and in Extreme Environments Made of Flexible Ultrawide-Bandgap Single-Crystalline AlN Thin Films.”

    Making It Work

    The UH research team previously developed III-N piezoelectric pressure sensor using single-crystalline Gallium Nitride, or GaN thin films for harsh-environment applications. However, the sensitivity of the sensor decreases at temperatures higher than 350 degrees Celsius, which is higher than those of conventional transducers made of lead zirconate titanate (PZT), but only marginally.

    The team believed the decrease in sensitivity was due to the bandgap – the minimum energy required to excite an electron and supply electrical conductivity – not being wide enough. To test the hypothesis, they developed a sensor with aluminum nitride or AlN.

    “The hypothesis was proven by the sensor operating at about 1000 degrees Celsius, which is the highest operation temperature among the piezoelectric sensors,” said Nam-In Kim, first author of the article and a post-doctoral student working with the Ryou group.

    While both AlN and GaN have unique and excellent properties that are suitable for use in sensors for extreme environments, the researchers were excited to find that AlN offered a wider bandgap and an even higher temperature range. However, the team had to deal with technical challenges involving the synthesis and fabrication of the high-quality, flexible thin film AlN.

    “I have always been interested in making devices using different materials, and I love to characterize various materials. Working in the Ryou group, especially on piezoelectric devices and III-N materials, I was able to use the knowledge I learned in my studies,” said Kim, who earned his Ph.D. in materials science and engineering from UH in 2022. His award-winning dissertation was on flexible piezoelectric sensors for personal health care and extreme environments.

    “It was very interesting to see the process leading to the actual results and we solved the technical challenges during the development and demonstration of the sensor,” he added.

    What’s Next?

    Now that the researchers have successfully demonstrated the potential of the high-temperature piezoelectric sensors with AlN, they will test it further in real-world harsh conditions.

    “Our plan is to use the sensor in several harsh scenarios. For example, in nuclear plants for neutron exposure and hydrogen storage to test under high pressure,” Ryou said. “AlN sensors can operate in neutron-exposed atmospheres and at very high-pressure ranges thanks to its stable material properties.”

    The flexibility of the sensor offers additional advantages that will make it useful for future applications in the form of wearable sensors in personal health care monitoring products and for use in precise-sensing soft robotics.

    The researchers look forward to their sensor being commercially viable at some point in the future. “It’s hard to put a specific date on when that might be, but I think it’s our job as engineers to make it happen as soon as possible,” Kim said.

    University of Houston

    Source link

  • Sharing compact EVs can avert battery crisis

    Sharing compact EVs can avert battery crisis

    Newswise — Most global scenarios and governmental targets for decarbonizing the transport sector consider battery-powered electric vehicles as a main part of the solution. Enormous amounts of raw materials are needed to build enough batteries and ensure a transition to low-emission vehicles.

    Access to lithium is critical, as it is used in all types of EV batteries.

    Future demand needs to decrease

    “It seems very likely we’ll have a shortage. The key lies in the demand. The demand needs to decrease to avoid long-term supply problems,” says Fernando Aguilar Lopez, a PhD candidate at the Norwegian University of Science and Technology’s (NTNU) Department of Energy and Process Engineering.

    There are huge deposits of this super-light, silver-white substance around the world. The problem is that it is not being mined fast enough to keep up with demand for lithium-ion batteries (LIBs) for electric vehicles.

    As a result, we may face supply bottlenecks that could last for decades. 

    Meet MATILDA — A model for supply scenarios

    Fernando Aguilar Lopez is an expert in analysing global material flows. This means he studies raw materials cycles from extraction to production, use, and scrapping. He, postdoc Romain Billy and Professor Daniel B. Müller have developed a material flow analysis model named MATILDA (MATerIaL Demand and Availability). The model was recently introduced in the Journal Resources, Conservation & Recycling.”

    The study investigates strategies to manage resource use in EV batteries. MATILDA helps to understand more of the critical factors affecting resource supply. Also, the model calculates how various interventions could mitigate the demand.

    Most comprehensive model

    “Society urgently needs systemic approaches for addressing supply problems,” Müller said.

    MATILDA is the most comprehensive model to date for battery raw materials in the global vehicle fleet. Tools such as this can play a crucial role for industry and policy makers to develop strategies to ensure secure and resilient critical raw materials supply chains, Müller said. 

    Explored more than 8 000 scenarios

    The NTNU researchers have explored more than 8 000 scenarios to understand the key drivers of material use.

    Reading this on your laptop and want to explore the details? Check out BATMAN’s interactive visualization tool, where you can build your own scenario and check the resource use for the nine materials the researchers have investigated. http://129.241.153.168:8051/

    This assessment showed that profound social and lifestyle changes are the most efficient measures to reduce material supply risks.

    More sharing of smaller EVs

    To avoid excessive demand for single metals, we need investments in a wider range of new battery technologies, the researchers said.

    Nor do we need more, larger, heavier electric cars. On the contrary, more of us should share smaller cars with small battery packs.

    “Extending the lifespan of vehicles and batteries by facilitating reuse and replacement will also be crucial in reducing the demand for raw materials,” says Aguilar Lopez.

    Identifying problem shifting

    Reducing the demand for certain materials could increase pressure on others. MATILDA shows what happens when this kind of problem shifting happens with cobalt, nickel and lithium. The model also offers alternative solutions.

    The researchers says that problem shifting may be critical if the industry collectively shifts towards a new technology at a specific time. One example is the current trend toward lithium iron phosphate batteries (LFP).

    Battery trends could affect food prices

    In 2021, manufacturers as VW, Volvo and Tesla said they planned to adopt LFP. These batteries are free of problematic, costly substances such as cobalt and nickel.

    The downside is that they require a lot of phosphorus, an essential raw material for the fertilizer industry. Thus, an increase in demand could be susceptible to price shocks, potentially affecting small farmers, and threatening food prices.

    Recycling not a solution in the near term

    Another finding in the NTNU study is that although necessary, recycling will not significantly reduce the pressure on raw materials in the coming decade. Our EVs are still reasonably new, and not enough of them will be scrapped for recycling until 10 to 15 years from now.

    However, MATILDA shows that primary demand can be reduced by improving efficiencies in lithium, aluminium, manganese, and phosphorus recycling. These materials are currently uneconomical to recycle and are not included in the latest EU battery regulations.

    Extending lifetime can be crucial

    Without incentives to recover these materials, they are likely to be lost to the environment, Aguilar Lopez said.

    He adds that a key issue is that the proposed EU regulations only target the supply side, but not demand. This means that badly needed changes are not actively encouraged.

    Warp speed into bottlenecks

    Half of new car sales in the USA are predicted to be electric by 2030. This is also the target in a recent Executive Order issued by US President Joe Biden. In the EU, all new car sales must be electric by 2035.

    Several car manufacturers have said that they will be able to make the transition several years before this deadline.

    This means if we don’t take measures quickly to increase the production of battery materials, we will be driving at warp speed right into the supply bottleneck.

    Bigger cars mean bigger batteries

    According to this Climate and Community project report, the average battery pack in the US has increased in capacity by nearly threefold since the first Nissan Leaf hit the road a decade ago.

    “We’re driving ever larger, heavier cars with massive battery packs. At the same time, we only use these vehicle actively about five per cent of the time. The rest of the time, it’s parked. Only a few of us drive further than 45 kilometres daily,” Aguilar Lopez said.

    Small is beautiful

    He sees a lot of indicators that fewer people need to own their own car, and that more of us could be OK with sharing smaller, lighter vehicles. In other words, we need more 30-40 kwh Nissan Leaf-type batteries instead of the 60-100 kwh batteries that are found in most Teslas and SUVs.

    “Norwegian politicians have chosen to no longer subsidize the largest and most expensive electric cars. This is one example of a powerful measure that indirectly favours smaller cars,” he said.

    The researcher believes that moves like this are essential and can inspire both individual countries and the EU.

    More than 300 new mines needed

    Analyses show that the world needs more than 300 new lithium mines by 2035 to keep up with demand. Prices have risen by several hundred per cent in a few years There is great interest in extraction, but disputes have erupted over new mines in a number of places.

    The newest lithium mine in Europe opened around 10 years ago. Some reports say it may take up to 20 years to get a new one up and running. Many initiatives fail and are shut down.

    “Ideally, we should have started preparing for this situation 20 years ago,” Aguilar Lopez said.

    Buses and ferries worsen bottlenecks

    As if that wasn’t bad news enough, the new NTNU study only considers resource consumption by private vehicles. But buses, ferries, and other large vessels are also being electrified using batteries.

    Machinery is another area where changes are afoot. Müller said the entire mining sector is completely shifting towards electrification and automation.

    These additional demands could quickly worsen supply bottlenecks for raw materials.

    “Achieving the goals set by the EU and individual countries could thus be problematic. This would also create a significant threat to the climate goals,” Aguilar Lopez said.

    Promising technologies require more lithium

    Although the development of highly efficient solid-state batteries is promising, they do not solve the lithium supply crisis either.

    “Actually, solid-state batteries can worsen the situation, requiring more lithium per kilowatt hour — almost twice as much in some cases,” Aguilar Lopez said.

    Challenges everywhere

    Hydrogen fuel cells are becoming a mature technology, but they are expensive. They will be far more effective in ferries and other heavy vessels than in cars.

    Lithium-free sodium-ion batteries are another promising alternative. They are in an early R&D stage, so it will take a while before they are road-ready.

    “No matter where we turn, we encounter challenges,” Aguilar Lopez said.

    Cities for people — not cars

    So, what would be the best option to get us out of the lithium supply crunch?

    Aguilar Lopez’s immediate answer is that cities should be designed for people, not cars.

    “Look at Zürich, Vienna, Paris, and Oslo. Major moves are being made in many places to create more pleasant urban areas and entice more people to leave their cars. And quite a lot are doing just that. We need regulations– and of course people must accept them,” Aguilar Lopez said.

    BATMAN project proposes new measures

    Norway was a first mover in terms of electrifying the vehicle fleet. Thus, it is expected to be the first country to have larger amounts of spent batteries once the first EVs reach end-of-life.

    Müller, Aguilar Lopez and Guillaume Billy were part of the research team for the BATMAN project, From 2019-2022. The project was designed to investigate opportunities for the Norwegian industry to engage in battery reuse and recycling.

    Based on the main findings, the scientists suggested several strong actions:

    • Facilitate and finance a broader range of battery research geared towards breakthroughs in chemistries and recycling practices.
    • Step up and streamline the development of new lithium mines, also in the EU.
    • Increase car sharing and better public transport to reduce overall vehicle ownership.
    • More small cars with smaller battery packs.
    • Greater numbers of and more efficient charging infrastructure.
    • Facilitate the recycling of all materials beyond the ones that are already regulated.
    • Extend car and battery life via increased reuse and easier repair and replacement of batteries.

    Reference: Aguilar Lopez, F..; Billy, R.G.; Müller, D.B. Evaluating strategies for managing resource use in lithium-ion batteries for electric vehicles using the global MATILDA model. Journal of Resources, Conservation and Recycling

    Norwegian University of Science and Technology (NTNU)

    Source link

  • Immigration experts on Title 42, analysis of immigration policies, and other migrant news in the Immigration Channel

    Immigration experts on Title 42, analysis of immigration policies, and other migrant news in the Immigration Channel

    Title 42, the United States pandemic rule that had been used to immediately deport hundreds of thousands of migrants who crossed the border illegally over the last three years, has expired. Those migrants will have the opportunity to apply for asylum. President Biden’s new rules to replace Title 42 are facing legal challenges. The US Homeland Security Department announced a rule to make it extremely difficult for anyone who travels through another country, like Mexico, to qualify for asylum. Border crossings have already risen sharply, as many migrants attempted to cross before the measure expired on Thursday night. Some have said they worry about tighter controls and uncertainty ahead. Immigration is once again a major focus of the media as we examine the humanitarian, political, and public health issues migrants must face. 

    Below are some of the latest headlines in the Immigration channel on Newswise.

    Expert Commentary

    Experts Available on Ending of Title 42

    George Washington University Experts on End of Title 42

    ‘No one wins when immigrants cannot readily access healthcare’

    URI professor discusses worsening child labor in the United States

    Biden ‘between a rock and a hard place’ on immigration

    University of Notre Dame Expert Available to Comment on House Bill Regarding Immigration Legislation, Border Safety and Security Act

    American University Experts Available to Discuss President Biden’s Visit to U.S.-Mexico Border

    Title 42 termination ‘overdue’, not ‘effective’ to manage migration

    Research and Features

    Study: Survey Methodology Should Be Calibrated to Account for Negative Attitudes About Immigrants and Asylum-Seekers

    A study analyses racial discrimination in job recruitment in Europe

    DACA has not had a negative impact on the U.S. job market

    ASBMB cautions against drastic immigration fee increases

    Study compares NGO communication around migration

    Collaboration, support structures needed to address ‘polycrisis’ in the Americas

    TTUHSC El Paso Faculty Teach Students While Caring for Migrants

    Immigrants Report Declining Alcohol Use during First Two Years after Arriving in U.S.

    How asylum seeker credibility is assessed by authorities

    Speeding up and simplifying immigration claims urgently needed to help with dire situation for migrants experiencing homelessness

    Training Individuals to Work in their Communities to Reduce Health Disparities

    ‘Regulation by reputation’: Rating program can help combat migrant abuse in the Gulf

    Migration of academics: Economic development does not necessarily lead to brain drain

    How has the COVID-19 pandemic affected immigration?

    Immigrants with Darker Skin Tones Perceive More Discrimination

     

    Newswise

    Source link

  • Pilot Project to Help Patients with Transportation Barriers Get to Appointments

    Pilot Project to Help Patients with Transportation Barriers Get to Appointments

    Newswise — A collaboration between UC San Diego Health and 211 San Diego, a region-wide, non-profit referral service that connects anyone living in San Diego County to community, health, social and disaster services, will help to improve patient outcomes by addressing social determinants.

    The region’s only academic medical center is the first hospital system in the county to participate in the pilot project, which will improve access to transportation resources for UC San Diego Health patients who have been discharged from the hospital and may have barriers getting to follow-up appointments.

    The recently launched effort is made possible through the San Diego Community Information Exchange (CIE), which 211 San Diego spearheads and of which UC San Diego Health is a member.

    The CIE works to improve how services, such as transportation, food, legal assistance, and more, are delivered in our region. The services are coordinated through an integrated technology platform that shares information electronically to network partners with the goal of improving the health and well-being of people across San Diego County.

    The CIE is a growing network of 132 local partner organizations, working together to break down silos of care across health, social and educational sectors.

    “The collaborative effort between UC San Diego Health, 211 San Diego/CIE and CIE partners, will allow us to identify the social needs of patients. Then, using innovative technology, we can seamlessly connect our patients to needed resources,” said Christopher Longhurst, MD, chief medical officer and chief digital officer at UC San Diego Health.

    The process works by screening patients to ensure they have access to transportation resources to get to their follow-up appointments. If a patient is found in need of services, they can be connected to more than 410 services offered by the CIE network of providers.

    “The overall goal is to provide proactive, patient-centered care and advance equity for patients in our health system,” said Donna Beifus, chief administrative officer for care management at UC San Diego Health.

    The pilot project will allow for the sharing of challenges and best practices, inform policy decisions and contribute to the ongoing development of the CIE technology platform.

    “211 San Diego’s mission is to connect people to resources and to partner with our community to transform how people access help,” said William York, president and chief executive officer of 211 San Diego.

    “We are proud to work with UC San Diego Health to launch this project that is our mission in action. It uses the full strength of our cross-sector CIE network to remove access barriers and get people connected to critical health services.”

    # # #

    UC San Diego Health

    Source link

  • Oak Ridge National Laboratory’s Robert Wagner receives 2023 SAE Medal of Honor

    Oak Ridge National Laboratory’s Robert Wagner receives 2023 SAE Medal of Honor

    Newswise — SAE International has awarded Oak Ridge National Laboratory Buildings and Transportation Science Division Director Robert Wagner with the SAE Medal of Honor for his dedication and support of the organization’s mission of advancing mobility solutions.

    Wagner was presented with the award at a ceremony in Detroit. This is the most prestigious award that the automotive engineering society annually bestows upon one of its more than 128,000 members for individual achievement.

    Wagner has been a champion of SAE since the late 1990s and has founded, organized or chaired more than 20 SAE International symposiums, panels and conferences. In 2011, during a time of significant and rapid breakthroughs in engine technologies, he co-founded the High Efficiency Internal Combustion Engine Symposium and helped develop it into a premier global transportation event. Building on that success, in 2016 he co-founded a symposium that focused on range extenders and brought together leaders from the U.S. government and across the profession to share insights into the challenges and opportunities of integrating high-efficiency engines into electrified drivetrains. This was one of the first SAE events focused on electric vehicles and hybridization, helping the organization remain at the forefront of new technology innovations on the global stage.

    More recently, as transportation research focus has shifted to net-zero-carbon fuels, Wagner recognized the need to create an opportunity for a diverse group of global stakeholders to have a neutral forum setting in which to convene and exchange ideas. This led to a series of symposiums dedicated to net-zero initiatives and the interface with engines and fuel.

    Wagner has focused on passing down the legacy of planning and organizing to other researchers, inspiring and mentoring a new generation of engineers to understand the importance that symposiums can have on securing SAE International’s reputation as a world authority on automotive engineering.

    “I am pleased to see that SAE has recognized Robert for his contributions to advancing transportation research, both nationally and internationally,” said Xin Sun, associate laboratory directory for ORNL’s Energy Science and Technology Directorate. “His leadership at ORNL has been instrumental to maintaining the laboratory’s reputation as a leader in transportation and mobility research and development.”

    At ORNL, Wagner has led transportation research and initiatives for more than 20 years and is well regarded as a scientific leader, strategic planner, mentor and collaborator, working with the Department of Energy, other national laboratories, academia and industry partners. Within this role, he stewards two DOE user facilities — the National Transportation Research Center and the Building Technologies Research and Integration Center. He originally came to ORNL as an undergraduate student in 1992 and then joined ORNL as a postdoctoral research fellow in 1999, advancing to a distinguished research staff role followed by leadership roles in which he directed a diverse portfolio of transportation research. For 10 years, Wagner served as DOE’s laboratory relationship manager for advanced combustion, emissions and fuels and was a founding member of the DOE initiative on the Co-Optimization of Fuels and Engines.

    He is an SAE Fellow, two-time winner of the SAE International Forest R. McFarland Award, and a recipient of the SAE International Leadership Citation. In 2019, Wagner was named in the Inaugural SAE Top Contributor Class based on his volunteer and engagement contributions. He has co-authored 40 SAE publications, presented 14 invited talks at SAE International events and served on multiple committees and the editorial board of the SAE International Journal of Engines. Wagner is also a Senior Member of the Institute of Electrical and Electronics Engineers, a Fellow of the American Society of Mechanical Engineers and the American Association for the Advancement of Science, and has won numerous awards from other organizations for research, leadership and service.

    A native of Missouri and first-generation college graduate, he earned his doctoral degree in mechanical engineering from the Missouri University of Science & Technology, where he delivered the commencement address to Ph.D. graduates in December 2022.

    UT-Battelle manages ORNL for the Department of Energy’s Office of Science, the single largest supporter of basic research in the physical sciences in the United States. The Office of Science is working to address some of the most pressing challenges of our time. For more information, please visit energy.gov/science.

    Oak Ridge National Laboratory

    Source link