ReportWire

Tag: packaging materials

  • McDonald’s Japan overhauls packaging with rPET strawless lids

    [ad_1]

    McDonald’s Japan will begin phasing out paper straws and introducing 100% recycled PET (rPET) strawless lids for cold drinks nationwide from Wednesday, 19 November 2025.

    The shift to strawless lids—designed so customers can drink directly from the cup—forms part of a broader packaging plan the company says will cut the use of virgin plastic by about 6,600 tonnes a year between 2022 and 2025.

    McDonald’s Japan Inc., headquartered in Tokyo’s Shinjuku ward and led by president and CEO Thomas Ko, outlined the measures in an update dated 27 October 2025.

    Switch to strawless lids begins on 19 November

    The new rPET strawless lid will be used on paper cups for cold drinks and will replace the current lid-and-straw set-up.

    According to the company, the lid has been in development for more than three years to meet the needs of in-store, takeaway, delivery and drive-through orders. The design includes a drinking spout intended to open easily while resisting accidental leaks in transit.

    For carbonated beverages, the lid is built to limit liquid “blow-out” caused by pressure changes during movement. As the rollout progresses nationwide, paper straws will be discontinued in sequence.

    The move places “strawless lids”, “rPET” and “recycled PET” at the centre of McDonald’s Japan’s single-use plastic reduction strategy.

    Company targets cut of about 6,600 tonnes of virgin plastic a year

    McDonald’s Japan says it has been reviewing containers and packaging materials since 2022 with the aim of prioritising renewable, recycled or certified inputs.

    The series of changes—culminating in the introduction of rPET strawless lids—are expected to reduce the annual use of virgin plastic by roughly 6,600 tonnes once fully implemented.

    The company frames the transition as part of a multi-year plan running through 2025, aligning with broader retail trends on plastic reduction, packaging optimisation and circular materials.

    Biomass plastic carrier bags expand nationwide

    From 19 November, stores across Japan will also begin switching their takeaway carrier bags to versions made with 95% biomass plastic, replacing bags previously made with 50% biomass content.

    The higher-content bags were trialled earlier in 2025 across all McDonald’s outlets in Nagasaki Prefecture (23 locations, excluding the Sasebo Air Base store). The company reports that durability and usability were equivalent to the earlier bags, paving the way for national deployment.

    Customers are encouraged to decline a bag when not needed as part of ongoing efforts to reduce packaging waste.

    Happy set materials move to certified paper and away from virgin plastic

    Beyond drinks packaging and carrier bags, McDonald’s Japan says it is working to move all Happy Set® toys to renewable, recycled or certified materials by the end of 2025.

    As part of that effort, the company switched its picture books—introduced with Happy Set in March 2025—from a hardcover format using virgin plastic to a softcover made from FSC-certified paper.

    The book packaging likewise changed from plastic to an FSC-certified paper bag.

    These measures add to the company’s stated goals around virgin plastic reduction and responsible sourcing in its family and kids’ ranges.

    “McDonald’s Japan overhauls packaging with rPET strawless lids” was originally created and published by Packaging Gateway, a GlobalData owned brand.

     


    The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site.

    [ad_2]

    Source link

  • Sidel grows sustainable footprint in Lagos, Nigeria

    [ad_1]

    Sidel has opened a new office in Lagos to strengthen its operations and sustainable packaging initiatives across West Africa.

    Located in Phoenix, Ikeja, the new hub is expected to enhance project management, engineering, and customer services for clients in Nigeria, Ghana, Côte d’Ivoire, and nearby markets.

    The company, known for its packaging solutions in beverages, food, and personal care, said the Lagos base will help it respond more efficiently to local needs and drive the adoption of sustainable packaging technologies across the region.

    The Lagos site becomes Sidel’s third major location on the continent, following offices in South Africa and Kenya. According to the company, this expansion supports its long-term strategy of promoting local partnerships and industrial growth.

    Pietro Cassani, President and CEO of Sidel, said the move reflects the company’s belief in “local talent and continuous innovation across all packaging materials – PET, can, and glass.”

    By operating closer to customers, Sidel aims to provide better technical support and foster knowledge-sharing in packaging sustainability.

    Nigeria’s position as Africa’s largest consumer market makes it a key location for packaging development.

    With a population exceeding 230 million, the country’s food and drink sector was valued at USD 54.1 billion in 2024 and is projected to expand by around 6% annually through 2033.

    Across West Africa, growing consumer awareness of health, quality, and sustainability is shaping packaging trends.

    The demand for recyclable and lightweight materials—such as PET bottles, glass, and aluminium cans—is driving companies to adopt more efficient and eco-friendly production methods.

    Sidel’s technologies, including EvoBLOW, EvoFILL Glass, and Super Combi, are designed to reduce material waste and energy use while maintaining high production performance. These innovations align with the region’s wider transition towards circular and sustainable packaging systems.

    Sidel has already developed partnerships with several African companies. In Nigeria, it worked with StrongPack to install one of the continent’s fastest PET water lines, incorporating Actis™ coating technology to extend bottle shelf life.

    In Ghana, the company equipped Twellium Industrial’s Kumasi plant with high-speed PET packaging lines and advanced labelling systems.

    The new Lagos office will also focus on developing local engineering skills, creating jobs, and supporting customers’ sustainability goals.

    Following its opening, Sidel hosted a customer innovation seminar titled Driving Packaging Innovation and Sustainability for Tomorrow, which brought together industry leaders from Nigeria and Ghana to discuss the future of sustainable packaging in West Africa.

    “Sidel grows sustainable footprint in Lagos, Nigeria” was originally created and published by Packaging Gateway, a GlobalData owned brand.

     


    The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site.

    [ad_2]

    Source link