If your property has access to flood irrigation, you know the benefits of deep watering for your landscape plants and trees. However, flooding your garden every 13 days may not be practical for watering raised beds and vegetable gardens. There is a way to water your garden using flood irrigation water that works well. This blog post explains how to install a flood irrigation system to effectively water your garden and raised beds.
After the initial effort and investment, it is a low-cost solution for watering your garden. Not only does this method avoid the chemicals associated with treated water, but it is also much less expensive for the home gardener. Let’s dive into how to water your garden and yard using flood irrigation.
What is flood irrigation?
Flood irrigation is a system that captures and uses excess water from rainfall or snowmelt and provides a natural, chemical-free water source for your plants.
In the Phoenix Valley, most irrigation water originates from SRP’s 13,000-square-mile watershed. It channels melted snow and rain into the Verde and Salt rivers. SRP then routes the irrigation water to the customer through lakes, dams, canals, and laterals.1
Homeowners in flood-irrigated areas have access to irrigation runs every 13 days with a dry-up period (for canal repairs) during the winter. The average cost for irrigation water is $6.80 per hour.
According to AMWUA, ”about 22,000 homeowners receive flood irrigation or about 5 percent of SRP lands.”2
My property does not have flood irrigation (I wish it did!), but my neighbor Larry Burnett‘s property does. I’m sharing the method he developed to use flood irrigation to water his garden.
He cleared the use of this method with the Roosevelt Water Conservation District. Check with local authorities to ensure you comply with local laws or water regulations.
What are the benefits of flood-irrigated water?
Flood irrigation offers a cost-effective, untreated water source rich in nutrients that promotes robust root systems by storing water deeper in the soil, reducing the need for frequent watering and saline buildup. This method helps protect vegetation from drought and significantly reduces water evaporation compared to traditional sprinklers.1
What are the challenges of using flood irrigation to water your garden?
- Gardens often need watering more often than every 13 days.
- You need more control over the amount of water than flooding with irrigated water offers.
- Flood irrigation relies on gravity, so water can’t reach raised beds or other elevated areas.
How to water your garden and landscape plants with flood irrigation
1. Install a storage tank (or multiple tanks, depending on your water needs) and an internal pump
Select as large a tank as will fit in your space. Choose a location close to your sprinkler system if possible. A 1750-gallon tank holds up to 2000 gallons when full.
2. Connect the tank to your sprinkler system
Connect the tank and irrigation water to the existing sprinkler system. Install a switch to enable switching between city water and irrigation water.
3. Fill the tank each time you have irrigation
When it’s your turn for irrigation, use an external pump to fill the tank. Run a 2-inch PVC discharge hose from the pump to your tank. Turn on the pump and fill up the tank.
A pump and 2-inch line allow Larry to fill his tank in 20-30 minutes during his regular irrigation runs.
Larry also suggests running your sprinklers and drips during the time you have irrigation while you are filling up your tank. This takes full advantage of water coming into your yard during your irrigation slot.
4. Use water from the tank to water your yard and garden.
The internal pump provides the water pressure (especially as the tank empties). It may take some experimentation to figure out the correct water pressure. Adjust your valves as needed so you know how much water you use and how long it takes to water your garden and drip system.
5. Switch to city water as needed if the tank empties
If you run out of stored irrigation water, switch back to using city water from the storage water. Install an additional tank if you run out and use city water between each irrigation cycle.
Thank you to Larry Burnett for contributing to this post.
Larry Burnett is a retired Administrator from Banner Health and a Partner from KPMG. Larry has lived in Arizona since 1984 and gardened here extensively.
He is a Master Gardener through the University of Arizona and a mentor for Master Gardener students. His favorite time of the day is when he is outside in his greenhouse, garden, and flower beds.
Sources:
- https://blog.srpnet.com/managing-flood-irrigation/
- https://www.amwua.org/blog/why-are-we-still-using-flood-irrigation-in-the-desert
Resources:
Angela Judd
Source link
