Adding shade cloth to a hot summer garden is easier than you think. This is how we added shade cloth to our Arizona garden this year.

Adding Shade Cloth to a Hot Summer Garden

Disclaimer: This post may contain affiliate links. See my disclosure policy for more information.


In March 2020, we expanded our garden, adding six raised beds and a row of arched trellises. One of the best parts of this new garden area is that it receives full sun. That is why I expanded the garden into this part of the yard. I’m amazed at how quickly things grow

However, I decided to add some temporary shade to the new garden area because the sun can be too much during the hottest months of the year. 

adding shade cloth to a hot summer garden

When should you add shade to your garden?

Most vegetables are stressed when temperatures are above 90℉ (32.2°C). Shade keeps the direct sun off foliage; the shaded area can be about 10℉ (6°C) cooler than areas without shade. I like to put shade up once temperatures are consistently above 90℉ (32.2°C).


Plant Heat-Tolerant Cover Crops Instead Take the summer off!

When should you take the shade cloth down?

Likewise, I’ll take it down when temperatures are consistently below 90℉ (32.2°C) in the fall. When you remove the shade cloth, label each corner (NW, NE, SW, SE) and store it indoors until needed the following year.


How We Added Shade Cloth to Our Full-Sun Garden: 


1. Install pole supports

The first step was to install two additional pole supports. I already had two ten-foot-tall (3.05 m) poles in place for the lighting in my garden. They were put in place at the same time as my arched trellises by Jordan from Two Brothers Metal Works

The 12-foot-tall (3.6m) steel poles are buried 2 feet (61cm) deep and cemented in place. There is also a hook welded onto the end of each pole


2. Install wire supports before adding shade cloth to a hot summer garden

Once the supports were in place, it was time to provide center support for the shade cloth to prevent sagging

I used ⅛” stainless steel wire rope and created loops with aluminum crimping loop sleeves using this crimping tool.

Next, we attached the loops to the carabiners and put the cables on steel poles. (Depending on the length of the wire, you could also attach the looped wire to the pole without a clip.)

We added the lightweight support cables from corner to corner, creating an “X” pattern on which the shade cloth could rest. 

create diagonal support for Adding Shade to a Hot Summer Garden
“X” pattern made by crossing wires

This type of support is recommended for 100 square feet or larger areas. (FYI, the size of my shade cloth is 17′ x 20′ (5.18m x 6.09m) or 320 square feet (27.72 m²).

For shade cloth with an area over 400 square feet (37.16 m²), additional support (more than the crossed wires) may be required.

Shade Cloth Support Recommendations


3. Order shade cloth

Once the supports were in place, we measured the distance from each support to know what size shade cloth to order. Shade cloth comes in preset sizes on Amazon and ships pretty quickly. Grower’s Solution sells custom sizes of shade cloth but it takes longer to ship.

I chose white 50% shade cloth. Here’s why: 

  • Reduced heat build-up because it reflects the sunlight.
  • Diffused light under the shade cloth (less harsh shadows and glare).
  • Increased light quantity and duration for flowering plants than darker types of shade cloth.

Shade cloth comes in different coverages. However, using a percentage of no more than 40-60% shade cloth is recommended for vegetables during the summer. 

  • 40% shade cloth for most vegetables.
  • 50% shade cloth for tomatoes.
  • 60-70% shade cloth for succulents & other light-sensitive plants.
Shade cloth percentage guidelines

4. Install shade cloth

We used a ladder to get shade cloth up and over the wire supports. Then, we clipped a carabiner through the grommet on the shade cloth and onto the pole support.

It will be easy to take down at the end of the season or if a severe wind storm is expected. The shade cloth should last for several years. 

adding shade cloth to a hot summer garden

What we learned about adding shade cloth to a hot summer garden: 

  • Measure twice and then measure again. I eyeballed some of the support wire rather than measuring and ended up having to loop and add more wire. 
  • It’s possible to do this alone (depending on the size), but having another person makes it easier to measure accurately and attach the shade cloth
  • Although we had high wind and rain during the monsoon season, the shade cloth held up fine and remained attached.
adding shade cloth to a hot summer garden

Are you looking for more information about adding shade and the principles to remember when adding shade? Read this article about “How to Create Shade in the Garden” or watch this video:


If this post about adding shade cloth to a hot summer garden was helpful, please share it:


Angela Judd

Source link

You May Also Like

Fiddle Leaf Fig Root Rot Treatment: How To Save Your Plant

Fiddle leaf figs (Ficus lyrata) are one of the most popular species…

Have You Visited the Garfield Park Conservatory? – FineGardening

The winter doldrums are a reality in the Midwest, especially for gardeners,…

9 of the Best Snow Blowers in 2022 | Gardener’s Path Buying Guide

1. Ariens Deluxe 28 For no-nonsense, heavy-duty two-stage performance, the Ariens Deluxe…

Trending on Remodelista: In the Kitchen – Gardenista

This week, Remodelista spent some time examining what makes good kitchens hum.…